jandcguns 65 Posted January 17, 2015 Report Share Posted January 17, 2015 Hello my friend has a a s410 and he said it has 2pellets jammed in the barrel and can't get them out anyone know how to ? Thanks Quote Link to post
rodp 316 Posted January 17, 2015 Report Share Posted January 17, 2015 Usually poke them out with wooden dowel or cleaning rod. be careful you don't mark the barrel inside Quote Link to post
jandcguns 65 Posted January 17, 2015 Author Report Share Posted January 17, 2015 Thanks mate I think that's what he had in mind Quote Link to post
bugg 84 Posted January 18, 2015 Report Share Posted January 18, 2015 (edited) You can get a *soft drill bit on a rod that you turn by hand to drill them out if the wood doesn't work, its a slow tedious job but works well, drilled 12 out for someone one day with one Edited January 18, 2015 by bugg Quote Link to post
random 659 Posted January 18, 2015 Report Share Posted January 18, 2015 These are the ways I've heard and would try,I know someone who used a length of wire and now his uncle owns the rifle and says it won't group well,so the barrel could be scored... Quote Link to post
jandcguns 65 Posted January 18, 2015 Author Report Share Posted January 18, 2015 Thanks everyone I'll let him know Quote Link to post
johnbaz 363 Posted January 18, 2015 Report Share Posted January 18, 2015 Hi I once got a load stuck in a Logun S16 (easy to do!! )I got a steel rod and used a diamond needle file to cut a coarse thread on one end like a woodscrew, I wrapped a bit of electrical tape around it a couple of inches from the end to stop it biting in off centre and damaging the bore, I'd got them out in five mins (y) Good luck to your mate removing them John 1 Quote Link to post
PJWmids 35 Posted January 20, 2015 Report Share Posted January 20, 2015 Get yourself a decent barrel cleaning kit with rods and push out back through the barrel. 1 Quote Link to post
The one 8,494 Posted January 20, 2015 Report Share Posted January 20, 2015 As said a cleaning kit and constant pressure , 1 Quote Link to post
smithie 2,443 Posted January 20, 2015 Report Share Posted January 20, 2015 brass brazing rod for me when I managed to get a pellet stuck. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.