Axsor Filling Help

[bunny tickler 876]

just had a lad here for a fill up of his axsor ,the swedish one not the one with logan on the block , i put the filling probe in but it seemed really slack & air wouldnt go in ? the o rings are ok on the probe but its way too slack ,any ideas lads thanks ?

[barrywhite 282]

does the air leak out of the prob hole or the air wont go in the gun .

[bunny tickler 876]

out the probe hole barry plus wont go in lol

[barrywhite 282]

it could only be the in side of the hole the probe goes into has become scratched or worn ??? of most likely your o rings are damaged , o rings can look fine but leak air .You could try a little silicone grease on the o rings that sometimes can help .

[nasher1 258]

I bought a fill probe for a raider a few years ago from best fittings. the same probe fits the later axsor but doesn't fit the swedish version it was a good while back but have a look on their website

[secretagentmole 1,701]

Has the owner brought the right probe with them? Easy enough to mix up probes sometimes as some are very similar!

[bunny tickler 876]

thanks for the replies lads ,from what i know he bought the rifle & accesories that came with it second hand ,i will get him to ring best fittings cheers

[secretagentmole 1,701]

Oh nuts he could have the fill probe for a different rifle and some other poor muppet is going through the opposite thing where the probe does not fit the hole in the air reservoir!