wuyang 513 Posted January 6, 2015 Report Share Posted January 6, 2015 Are there any simple fool proof ways to attach tubes to the pouch...... Never done it before and need to practice,,,, do I use the constrictor knot which I have seen on youtube... All advice appreciated. Quote Link to post Share on other sites
roosika 110 Posted January 6, 2015 Report Share Posted January 6, 2015 I just wrap and tuck , find it works a whole lot better mate as it dosent cut into the tubes at all 1 Quote Link to post Share on other sites
gnipper 6,426 Posted January 6, 2015 Report Share Posted January 6, 2015 Either the constrictor knot or a small piece of tube stretched over like this 2 Quote Link to post Share on other sites
wuyang 513 Posted January 6, 2015 Author Report Share Posted January 6, 2015 Gnipper.......I've bought Dankung 1845, do I just use the same tube type....Its a great idea. Roosika...... Sorry,but whats wrap and tuck? Is that when for example when they attatch theragold band strips around the bands on the forks then tuck it under? Thanks Quote Link to post Share on other sites
gnipper 6,426 Posted January 6, 2015 Report Share Posted January 6, 2015 That's dankung 1745 in the pic mate. 1 Quote Link to post Share on other sites
roosika 110 Posted January 6, 2015 Report Share Posted January 6, 2015 Yes mate thats wrap and tuck 1 Quote Link to post Share on other sites
wuyang 513 Posted January 6, 2015 Author Report Share Posted January 6, 2015 Cheers...been a great help. Quote Link to post Share on other sites
28xxgeo 28 Posted January 6, 2015 Report Share Posted January 6, 2015 Go to asda/Tesco/poundland... Buy the cheap string... Wet it with your mouth and use the constrictor knot.... Thick enough that it doesn't cut into bands... Wrap And tuck too bulky for Me. 1 Quote Link to post Share on other sites
Kal 17 Posted October 13, 2015 Report Share Posted October 13, 2015 Was having a look online and found this method for attaching tubes: https://www.youtube.com/watch?v=zG8SXU5m-KQ Looks good for lighter tube sets but not sure if it would work on heavier band sets... 1 Quote Link to post Share on other sites
jonnie bravo 572 Posted October 13, 2015 Report Share Posted October 13, 2015 At the moment I'm just looping mine through the pouch, seems to be holding up pretty well. Quote Link to post Share on other sites
barrywhite 282 Posted October 14, 2015 Report Share Posted October 14, 2015 on tubes I use some crossbow serving string at present ,with the constrictor knot . you can experiment with different string over time but the constrictor knot dosent fail for me the bands wear first the knot never fails . Quote Link to post Share on other sites
Kal 17 Posted October 14, 2015 Report Share Posted October 14, 2015 I hadn't heard of crossbow serving string before - have been using waxed thread..but agree the constrictor knot does hold well! Quote Link to post Share on other sites
Truther 1,579 Posted October 17, 2015 Report Share Posted October 17, 2015 Are there any simple fool proof ways to attach tubes to the pouch...... Never done it before and need to practice,,,, do I use the constrictor knot which I have seen on youtube... All advice appreciated. Buy some small elastic bands and use the wrap and tuck method mate, the secret to it is to trap one end of the pouch in a vice so you can put a bit of pressure on while wrapping the band round the tubes, rubber on rubber grips really well without damaging the bands. The elastic bands tend to suffer damage from light pretty quickly, so i carefully cover the wrapping with women's nail varnish, being careful not to get any on the bands, done properly after some practice it last really well. 1 Quote Link to post Share on other sites
wuyang 513 Posted October 17, 2015 Author Report Share Posted October 17, 2015 Cheers Truther...I'll give it a go. Quote Link to post Share on other sites
Kal 17 Posted November 5, 2015 Report Share Posted November 5, 2015 (edited) I found another interesting video about attaching tubes to a pouch: https://www.youtube.com/watch?v=5W_XP8LaWQ4 The second method is of interest as I have found that tubes, being heavier that flat-bands, can (after time) distort the pouch leading to inaccuracy. So perhaps using the string to connect to the pouch instead will prevent this? Some experimenting is required! Update: The second method of attaching the pouch works very well; will be using this in future. Edited November 17, 2015 by Kal Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.