youcanthide...BANG 1,051 Posted January 2, 2015 Report Share Posted January 2, 2015 Bagged this hen pheasant with my top shot and single 1745. Best tubes for m 8 hexnuts for sure 3 Quote Link to post Share on other sites
.338winmag 78 Posted January 2, 2015 Report Share Posted January 2, 2015 Nice shot man ,so is the single work better than doubles ? Quote Link to post Share on other sites
carlstoke 34 Posted January 2, 2015 Report Share Posted January 2, 2015 R those tubes psuedo tapers, what size is the loop? Quote Link to post Share on other sites
youcanthide...BANG 1,051 Posted January 2, 2015 Author Report Share Posted January 2, 2015 They are technically tapered but the loops are only small I doubt they make much difference. They are probably 5cm. For the hexnuts they definetly are mate Quote Link to post Share on other sites
youcanthide...BANG 1,051 Posted January 2, 2015 Author Report Share Posted January 2, 2015 Blow right threw a pheasants head, smashes squirrels to bits too Quote Link to post Share on other sites
Guest OutdoorFanatic Posted January 2, 2015 Report Share Posted January 2, 2015 I left the rest of the tubes at guys mate could you get em for me if you go to his ? Only got that bit left and need to make some sets . Quote Link to post Share on other sites
Guest OutdoorFanatic Posted January 2, 2015 Report Share Posted January 2, 2015 That hen pheasant made my wellies wet lol Quote Link to post Share on other sites
.338winmag 78 Posted January 3, 2015 Report Share Posted January 3, 2015 So how do you measure the length of the tapered tubes ,ooops i see yah did'nt think it made much diffrence so if i max em out to my draw an cinch em up tight to some tabs would that work good with the hex nuts for hunting ? i ask because i just got some 1745 an i rigged a double set for a fellah but i have'nt rigged any of it up for me self been useing double 2050 an it hits but it is'nt much fun to use for much shooting for me because of the strength an it seems that yer more or less showing that i don't need all that power to get it done any way. Quote Link to post Share on other sites
youcanthide...BANG 1,051 Posted January 3, 2015 Author Report Share Posted January 3, 2015 Yes mate that would work. I started using singles when I saw a bloke on the slingshot forum smashing squirrels with singles and 9mm lead. They were just straight singles tied directly to the forks. I only put a loop on for easy attatchment so there is no chance of it slipping on the poly catapult. Doubt I will use anything else on this frame Quote Link to post Share on other sites
paddy65 6 Posted January 3, 2015 Report Share Posted January 3, 2015 Hi mate i been using tbg singles but it keeps splitting after bout 200 shots thinking about the tubes.would i tie them the same length as the tbg im using now ? cheers ATB paddy Quote Link to post Share on other sites
j j m 6,539 Posted January 3, 2015 Report Share Posted January 3, 2015 nice shot Quote Link to post Share on other sites
Chuck Rock 18 Posted January 3, 2015 Report Share Posted January 3, 2015 Surprised to see single tube doing that. great shooting. must be a long draw? Quote Link to post Share on other sites
youcanthide...BANG 1,051 Posted January 3, 2015 Author Report Share Posted January 3, 2015 Hi mate i been using tbg singles but it keeps splitting after bout 200 shots thinking about the tubes.would i tie them the same length as the tbg im using now ? cheers ATB paddy What I do mate is just stretch them until they are maxed out at my draw length and cut them at that Quote Link to post Share on other sites
youcanthide...BANG 1,051 Posted January 3, 2015 Author Report Share Posted January 3, 2015 Surprised to see single tube doing that. great shooting. must be a long draw? Not really, just past my ear, as long as they are maxed out they will do the job at most draw lengths I imagine mate Quote Link to post Share on other sites
Chuck Rock 18 Posted January 3, 2015 Report Share Posted January 3, 2015 Definitely trying this then. Only single I've used is 2040 for 9.5 steel. Cheers Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.