Lamp Problem

[thirsty ferret 1]

I currently have a lightforce blitz there seems to be a problem with the switch every time I turn it on it turns it self back off the handle gets hot and I cant get it to stay on can anyone shed any "light" on this problem thanks

[RossM 8,121]

Strip it down and check the wiring in the handle itself

[Giro 2,648]

Watch it don't burn your house down mate..

 

Sounds bit dodgy..

[gnipper 6,526]

Sounds like it's shorting out inside the handle.

[gnipper 6,526]

If it's still under warranty don't strip it take it back.

[Tiny 7 1,694]

New switch on it. Rewire it from the bulb holder to the battery with better wiring. And be done with cheap fag lighter connectors either put better sturdy ones or wire straight to the battery

[dogmad riley 1,347]

I currently have a lightforce blitz there seems to be a problem with the switch every time I turn it on it turns it self back off the handle gets hot and I cant get it to stay on can anyone shed any "light" on this problem thanks

It's knackered al give you a tenner for it ha ha.

 

Just strip it down and rewire it easy enough or if still under warranty send it back

[lurcher666phil 43]

For the money we all pay for these lamps they realy are poor quality in the wiring department

[lurchers 2,878]

I would convert the wireing to better quality and switch mate atb

[thirsty ferret 1]

where would I get a new switch and wire from?

[~REDWALL~ 60]

Wireing broke in my lightforce stricker last night ..only used it six times ...

[dogmad riley 1,347]

Dimmer circuit board set fire on mine half way round the land, the wiring on these lamps is shocking for the price they charge. Rewired mine and is spot on