nasher1 258 Posted November 30, 2014 Report Share Posted November 30, 2014 Took the raider from the cabinet today and when I put the air in it sounds like it has a leak so I had to take the at44-10 instead. I think the raider is due for a service and some new seals is this a dear job and any ideas roughly how much. Atb Roy Quote Link to post
shergar 42 Posted November 30, 2014 Report Share Posted November 30, 2014 was the gun empty when you took it out , try cocking the gun first then fill . Quote Link to post
secretagentmole 1,701 Posted December 1, 2014 Report Share Posted December 1, 2014 I would recommend Simon Atkins, the Airgun Doctor, being an ex Webley man he knows this gun inside out! 1 Quote Link to post
nasher1 258 Posted December 2, 2014 Author Report Share Posted December 2, 2014 Thanks i will look him up Quote Link to post
bigmac 97kt 13,780 Posted December 4, 2014 Report Share Posted December 4, 2014 May sound daft but this used to happen to mine when i was filling her some times and all i had to do was put some gun grease on the O ring that is on the adapter then try again and it worked a treat job was a good un . if you have no grease try Vaseline it works just as good and cheaper you have got to keep the o ring from drying out as it cracks if not you may need to try changing the o ring to . try this first as you may not need to pull the rifle apart ,what have you got to lose atvbmac 2 Quote Link to post
nasher1 258 Posted December 5, 2014 Author Report Share Posted December 5, 2014 I will try it later atb Roy Quote Link to post
nasher1 258 Posted December 5, 2014 Author Report Share Posted December 5, 2014 No it's leaking from the breech Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.