Ferret Box Help

[Ibracadabra 5]

Anyone know how I can make the clips on this sort of box more secure? Paranoid it will come open, cheers

[Ibracadabra 5]

Yes but one of them feels a bit loose, like a little snag on a branch would open it. Will try your hasp catch idea

[Rowan 308]

Just wire a snap d clip on , the sort of thing you have on the end of your dog lead. wire it on the lid and clip it onto a staple on the side/front , job done.

[Rustypippa 18]

Wrap a bungee around it

[russ2012 328]

Anyone know how I can make the clips on this sort of box more secure? Paranoid it will come open, cheers

i use the same when i make them with no complaints but usually i put the ring over the top catch then kneel on the door and screw the clasp downwards hope this helps

[Ibracadabra 5]

Thanks gents. Like the idea of hasp catches with a climbers clip on

[bobcullen79 1,495]

Tape up the bar that catches, making a tighter fit. Once its tight you`d be hard pressed to open them by accident. Plus you have two on, you`d be really unlucky to open both and not know about it. Ive a double box here with one catch per door and Ive never caught and opened them.

[Ibracadabra 5]

That's not the exact same one as mine bobcullen, just one off google images to show the locks that mine has. Mines a double box with two doors unfortunately. Will try the tape though, cheers

[bobcullen79 1,495]

That's not the exact same one as mine bobcullen, just one off google images to show the locks that mine has. Mines a double box with two doors unfortunately. Will try the tape though, cheers

Bit of tape mate and you`ll be away. Like I say, Ive never had one open and I do have one with a slight rattle. I dont think you can get any better catches, trick is in putting them on tight.

[moxy 617]

If positioned correct they should not spring open, unless they are cheap Chinese made.

I would look at the quality and try to get a little more strain on them. Perhaps reinforce the top catch where you are running the screws through the laminate of the ply.

Tidy looking box

[pie-eater 377]

If you look at those latches side on do they have a hole in them? If they do its just a case of putting a stick through the hole and theres no way they can open.

[The one 8,479]

Put a hasp on it then tie small carbineana onto the hasp it will never come undone