Going Out Tonight.

[meathumper 29]

Look what i just got, cant wait for dark

 

[/url]

[David.evans 5,323]

Nice mate

What mag is your scope set at ?

And a sugest that with nite site on you shoot at 6 x mag , also get a filter on the screen to darken the back glow , onto your face . It all helps

Atb dave

[meathumper 29]

Hi, i usually shoot at x8. Ill change that, cheers. Ive got some nitesite filters. Im a bit concerned that after adjusting the camera to the clearest picture, the vertical mil dots arnt that visible. Is this normal?

[David.evans 5,323]

Mill dots should stay clear mate , try the camera a bit more , also I've used the filters from nite , and found them to be to dark to the reticule (might be my old eye site ) a member on hear was kind enought to send me a pice of red filtter, witch works grand , and I've got a also a pice of green , which I can send you to try out , pm me your address mate and I'll post thenm to you !

Atb mate

Dave

[David.evans 5,323]

Also , move the camera in or out away from the scope , the mill dots should come clear

Dave

[meathumper 29]

Very kind dave, ill inbox you. Unfortunately I thought i would check zero and chrono as its not been quite right. Now i know why, its only firing at 6.40 - 6.50 ft lb, so its off back to the shop. As you can imagine im quite upset with the new nitesite sat there!

[David.evans 5,323]

Frigin right, how long you had the r10

Dave

[meathumper 29]

bought it dec 2013, thats not all. the stock has a rubbery coating which is peeling off, spoke to the gun shop the other day about this, they said send it back for a replacement. But now the lot is going back!

[bigmac 97kt 13,796]

Nice set up mate .

 

Mind i find that bsa,s costumer service is second to none when i got my son his scorpion a few years ago and it feck,d up i sent it back it came back and a week later it was fecked again they sent him a new rifle the second time so dont get upset it will be like new when you get it back let use no what happens .

 

atvbmac :thumbs:

[PJWmids 35]

Might just be the probe seal.

[meathumper 29]

Yep your right. Went to local gun shop, bought one. Just changing it now.

[meathumper 29]

All fixed just need to zero

[PJWmids 35]

Seals wear, it's a fact of life, they reckon you should replace all the seals annual, but I think you only need to if you notice a problem, and usually its the probe seal, I apply abbey sm50 to the pellet probe seal to keep it lubricated. You only need a small amount, I also put it on the pellet probe bolt side to keep it lubricated. Glad to hear your r10 is ready for action happy hunting.

Edited October 2, 2014 by PJWmids

[meathumper 29]

Right, went to zero and chrono. First two shots 12.50 - 12.49 ft lb. yes i know its over before someone starts jumping up and down.
The next 18 shots were at 9.00 - 9.10ft lb, so did some dry shots to lower pressure in bottle. The next 20 shots were at 7.90 - 8.05ft lb. I think its chewing the pellet probe o ring.
Any ideas would be appreciated

[PJWmids 35]

Is the probe going in central? Have you pulled some cleaning wads through the barrel using a pull through kit?