Jump to content

Mag Problem


Recommended Posts

Its probably nothing but annoying, the magazine for my cz 452 is pushing the bullets up at a funny angle and shaving the lead as I try to load, is there anything I can do? Think there about 25 quid so thought I'd ask first lol

Link to post

Right I believe the first thing to do is put it in comparison with another mag that doesn't do this, if you can see that the lip of the mag has been bent use a pair of pliers to gently alter...if all else has failed and at your own risk to damage mate.

 

Hope your mag is metal otherwise that'll be pretty hard.

Edited by celticrusader
Link to post

I had the same problem with an otherwise superb 452, it's the 10 shot Mags that are the bad ones, the 5's are fine.

Sorry to say I could never 'cure' it, the only partial cure for mine was to load no more than 8 rounds.

Another issue was somehow/sometimes the rim of the next lower round got in front of the one above and jammed

the whole lot, the only way to resolve that was to slip the mag bottom plate off and drop the spring, follower and all

the rounds through the bottom, IDEAL at night in the rain/wind.

I just got a load of 5's.

Link to post

I'll try that dan but ten shots go quickly when driving around the stubbles, so I'd be changing mags even quicker with the fives, lol, nothing worse than putting cross hairs on bunnies bonce and ....click lol

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...