Power Of Hw80

[benjo999 1]

How much is the power of an fac hw80 in joules

[moxy 617]

http://www.chapelsteel.com/ft-lbs-joules.html

 

Obviously it will depend on the ft/lb output to start with.

[slipper 116]

What can you get a hw up to fac wise? When I put in a variation was looking at adding a fac air, sorry to hijack you post mate

[moxy 617]

What can you get a hw up to fac wise? When I put in a variation was looking at adding a fac air, sorry to hijack you post mate

Around 18 possibly low 20's

[paulk73 151]

its a question of power plus accuracy more than anything else

[thursodog 353]

I have a fac v-mach kit in mines along with a buttoned piston, tuned trigger, polished internals, ptfe washers, barrel weight, added weight to the stock, high pressure breech seal, heavy MTC Taipan scope and a fixed spring guide.

It weighs 12 lbs which i find ok and is very accurate at 20fpe. It also passes the pellet turret test.

Awesome rifle

 

C

[thursodog 353]

I have a wee trick to soften the recoil that I've been using for some time.

I have a small amount of plumbing tap washers made from a dense black rubber, I take 1 and size it to sit inside the front of the piston between the top hat and polished spacer washer that seats into the piston sleeve.

It works brilliantly in dampening the recoil and is such a simple trick.

 

C

[mattybugeye 884]

I have a wee trick to soften the recoil that I've been using for some time.

I have a small amount of plumbing tap washers made from a dense black rubber, I take 1 and size it to sit inside the front of the piston between the top hat and polished spacer washer that seats into the piston sleeve.

It works brilliantly in dampening the recoil and is such a simple trick.

 

C

Great idea mate I think I may pinch that 1 lol

[Coypu Hunter 486]

Me too! Just waiting for the Maccari spring to arrive for my HW97K, then I'll be rummaging through me old tap washers!

Edited July 16, 2014 by Coypu Hunter

[slipper 116]

How do you go about getting the fac vmach kit? Can you order it off thw internet?

[Rake aboot 4,935]

Bit of fettling will see 30+ from an

[tomburras 2,729]

Bit of fettling will see 30+ from an

Blooming heck never knew that, I don't know hardly anything about airgun internals but that's a handy bit of power from a spring gun. How do they shoot at that sort of power level?

 

Cheers. Tom.

[Rake aboot 4,935]

Pretty good ( the ones I`ve used)

 

It takes a bit of skill to make them consistent at anything over 22 or so. Once over 30 its a bit scatty.

 

Once had a Diana 52 running at 39. Was murder to shoot though,, it was a test bed.

It dieseled once and shot 78Ft/lbs,, and a hole through leather football and my garage wall.