Air Rifle Silencer

[tillylamp 1,830]

hi,

 

does anyone know were to get hold of a 15mm to 1/2 unf screw cut adapter, that goes on with the front sight still in place?. I know I can get it from gun shops far from me, but It would have to be send from there, to my gun shop (rfd) which costs me an extra £15 every time I do it.

is it possible that someone on here makes them?

 

thanks tl

[CharlieSlade 14]

You can get sound moderator adapters from ebay

[toby63 1,236]

think you will have to remove your sight unless you get the hw one but that aint screw thread.never seen adaptor with a sight cut out

[RemyBolt 420]

Ebay, but as Toby said, you'll probably lose your front sight.

 

What guns, and is it possible to have your sight mounted further up the barrel?

[barrywhite 282]

I was able to get a part from holland or gemany not sure which country now , a part for hw 100 nothing strange or illegal but they can post straight to home address , because they are not based in the uk .

[John Stott 202]

I found Walkers helpful friend. Sorry old so cannot do links! They are based in the US and specialise in irons and true glo fore and rear. An e mail had a smashing response from them, they fixed me up with what I wanted ( irons for an AAS410 )

Cost is reasonable too.

[Rez 4,957]

Might want to try best fittings. Might find one there.

 

www.bestfittings.co.uk

[tillylamp 1,830]

hi,

thanks for all your help, much appreciated, there is a hw one with a cut out for the front sight but its £60 + rfd of £15 + post = £ for a silencer...that's to much in my opinion, I didn't fancy filing off the grooves on the end of the barrel were the front sight sits, to allow an adapter to slide on as this would ruin the front sight slots for the future, it may be a case of getting an adapter an get it altered by an engineer,

 

thanks tl