logan esq 99 Posted June 26, 2014 Report Share Posted June 26, 2014 Will Bisley grease be fine for my piston sleeve or is there a better on out there? Atb Quote Link to post
Skot Ruthless Teale 1,701 Posted June 26, 2014 Report Share Posted June 26, 2014 In the white pot? Thats what i use mate all is good. Quote Link to post
logan esq 99 Posted June 30, 2014 Author Report Share Posted June 30, 2014 Nice one skot. Also anyone know if fine wire wool is the best too polish the inside of the sleave? Atb. Quote Link to post
mattybugeye 884 Posted June 30, 2014 Report Share Posted June 30, 2014 (edited) I use ptfe based silicone only a small amount like as grease can get a bit sticky after a while and lightest coat of Lt2 grease on spring works good , and fine Emory cloth to polish up :-) Edited June 30, 2014 by mattybugeye Quote Link to post
logan esq 99 Posted June 30, 2014 Author Report Share Posted June 30, 2014 I watched marksman's video on you tube he used 0000wirewool to polish the inside but I can't find it any where.I rake it I can pick up the grease at any gun shop Atb Quote Link to post
moxy 617 Posted June 30, 2014 Report Share Posted June 30, 2014 &ff14=108&ff19=0'>http://www.ebay.co.uk/itm/like/310720291053?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&device=m&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=&ff14=108&ff19=0 Quote Link to post
moxy 617 Posted June 30, 2014 Report Share Posted June 30, 2014 Most car accessories shops should stock wire wool. Try halfords at a push or a garage that does bodywork and spraying. Quote Link to post
mattybugeye 884 Posted June 30, 2014 Report Share Posted June 30, 2014 I get it from toolstation :-) Quote Link to post
logan esq 99 Posted July 3, 2014 Author Report Share Posted July 3, 2014 Right then, I've stripped it down. And polished it loverly. Re greased all that is supposed to be greased.and there's still a slight twang. Does it need more grease? I was very libral when applying it. Atb Quote Link to post
mattybugeye 884 Posted July 3, 2014 Report Share Posted July 3, 2014 How snug is your spring guide ? Is it metal ? Quote Link to post
logan esq 99 Posted July 3, 2014 Author Report Share Posted July 3, 2014 It's snug but not too bad. And yes it's metal. Atb Quote Link to post
mattybugeye 884 Posted July 3, 2014 Report Share Posted July 3, 2014 I bet the twang from the metal guide Just to eliminate it wrap some electrical tape round it then fire couple of shots if no twang order a delrin guide job done !! My theoben twanged like mad put some tape on was silent am waiting on a new guide now Quote Link to post
mattybugeye 884 Posted July 3, 2014 Report Share Posted July 3, 2014 What gun is it I may have a delrin guide in shed ? Quote Link to post
logan esq 99 Posted July 3, 2014 Author Report Share Posted July 3, 2014 It's a pro sport. So just on wrap of tape around the guide? Quote Link to post
mattybugeye 884 Posted July 3, 2014 Report Share Posted July 3, 2014 Not got 1 for pro sport but Yea do that but don't fire too many shots as will chew up and clog up but it helps eliminate the guide no twang with some insulation tape ta da problem found ! Then look into delrin guide hope this helps mate Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.