Air Arms S200 Mk2, Question

[big napper 3,607]

does anyone know if an air guage can be fitted to the cylinder of an aa s200 mk2, has anyone had it done, if so where and how much did it cost, thanks for any replys

[ArchieHood 3,692]

Have a look on the XTX Air site...........

[big napper 3,607]

they sound ok, i had a quick read of it and i am going to get in touch with them, hopefully the price wont be too severe, cheers mate.

[s200guy 12]

If you are going to invest in your S200 heavily I would definitely recommend a regulator fitted by XTXAir. I get around shots per fill and less than 3fps spread. It's expensive but completely transforms the gun into something very very good.

 

I also have an adjustable trigger and ally barrel band from Rowan Engineering. Wouldn't hurt to replace your plastic bolt as well. (I thought only Mk.1s had a plastic bolt?)

 

The combination of the regulator and rowan barrel band gives very consistent results.

 

PS: I also put a Mk.3 stock on mine

Edited June 4, 2014 by s200guy

[big napper 3,607]

cheers for that mate, i have just got a 6 shot mag from rowan on it and they are great, i was thinking of getting a few more bits from them, they have some nice looking additions for guns, how many shots did you get from your s200 before you had the regulator fitted, cheers

[s200guy 12]

My S200 was overpowered when I first got it (around 13.5 ft/lb) so I was only getting around 40 shots and the power curve was horrible. I think my gun was particualrly bad because the previous owner had messed around with it, probably fitting a heavier hammer spring.

 

With the regulator I get I shots at 11.5 ft/lb with every shot being nearly the same fps. Darrin at XTXAir is a top bloke to deal with!

[big napper 3,607]

ok mate cheers for that, i think i might get something sorted out with mine it is very accurate but only get about 40 good shots