Purse Nets

[sprockerjay 74]

can some one tell me number of meshes I need to increase by if I start a purse net with 8 meshes on the ring cheers sj

[The one 8,461]

Up to you , better a wider net than a smaller one , you could add a mesh a row till your at 18 and start reducing it ?>

[pie-eater 377]

I go 10 12 14 16 18 4ft works well for me.

[ruggers13 268]

I start at 8 go to 17 do 4 rows of 17 and start reducing back to 8

[paulus 26]

9/15/9 on 2 1/4" (60MM) mesh board will give roughly a 3` 6" net just add more rows to make the length you require

[The one 8,461]

Reading this i pulled out a pamphlet 1996 Gerald L. Findley

Purse nets

Net 1 gauge 2 1/2 10,10,11,11,12,12,13,13,14,14,14,14,14,13,13,12,12,11,11,10,10,10,

Net 2 gauge 2 1/8 10,12,14,16,18,18,18,18,18,18,18,18,18,18,16,14,12,10,

net 3 gauge 2 1/8 9,10,11,12,13,14,15,16,17,18,19,20,20,20,20,20,20,20,20, 19,18, 17,16,15,14,13,12,11,10, 9.

Theres more at the bottom so i take it whatever works for you is okay

[sprockerjay 74]

I start at 8 go to 17 do 4 rows of 17 and start reducing back to 8

do you go up 1 or 2 at a time nd what length do u end up with cheers every one for you replies nd its still not to clear yet am jst not clued up with numbers yet

[Leeview 791]

Start with 8 next row increase at each end giving you10 DONT increase the next row, next row increase at both ends giving you 12,DONT increase the next row and so on by the 10th row you should have 18 half meshes wide do 3 rows at 18 then decrease at each end of every other row back down to 8,Depends what size mesh board as to what length the net ends up at, mine are 4'8"using a 21/4" board

Y.I.S Leeview

[pie-eater 377]

Leeview why don't you increase every row?

[ruggers13 268]

 

I start at 8 go to 17 do 4 rows of 17 and start reducing back to 8

 

do you go up 1 or 2 at a time nd what length do u end up with cheers every one for you replies nd its still not to clear yet am jst not clued up with numbers yet

hi yeah i go up in ones this is how I do them properly 8,8,9,10,11,12,13,14,15,16,17,17,17,17,16,15,14,13,12,11,10,9,8,8, end up with a 4ft net hope this helps pal Edited May 10, 2014 by ruggers13

[pie-eater 377]

I don't like to shape all the way out to the middle so I have plenty of bagging without having loads of meshes near the rings where they serve no purpose.

 

10 12 14 16 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 16 14 12 10

[Rabbiting man 1,191]

I make my own purse nets 18 meshes wide & 20 rows down with a 2.1/8 mesh board.

 

I start off with 12 meshes wide then finish with 12 meshes.

 

12 14 16 18 18 18 18 18 18 18 18 18 18 18 18 18 18 16 14 12.

[sprockerjay 74]

that mint lads got loads of diferent ways to try now just need to keep coming back to this thread thanks very much everyone for all your great sugestions will try them all out to see which one suits me

yis sj

[Leeview 791]

Leeview why don't you increase every row?

basically I increase every other row so Im not adding to a half mesh its always a full mesh that I increase on and at each end to balance it out, just how I was shown many years back

Y.I.S Leeview

[pie-eater 377]

Ah ok that makes sense