Gaoler 83 Posted April 27, 2014 Report Share Posted April 27, 2014 (edited) Hello All, I need to change the O-ring in the HW100 breech (where the air cylinder screws in too). Does anybody know how to get the old O-ring out, there is very limited space and do not want to damage the brass valve, Hull cartridge use a special tool, which they do not sell to the public..!! Any ideas..?? Thanks John... Edited April 27, 2014 by Gaoler Quote Link to post
rob2278 2 Posted April 27, 2014 Report Share Posted April 27, 2014 Use a pin to pick it off. Quote Link to post
Dcarne 3 Posted April 27, 2014 Report Share Posted April 27, 2014 Ya can get a airing removers, they are like a screw driver with little hooks n pins on end, DIY shops sell them, does ur wh100 have full power from 1st shot or does it build up with 1st few shots??? As I've just got gun thanks Quote Link to post
Gaoler 83 Posted April 27, 2014 Author Report Share Posted April 27, 2014 Full power from first shot, deadly accurate rifle mate. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.