Gaoler 83 Posted April 15, 2014 Report Share Posted April 15, 2014 (edited) Hello All, Got the HW100 out tonight to go shooting, air reservoir empty?? recharged the gun up to 200 bar, lost its air in about half hour, I cannot hear any hissing, not sure were it is coming from..?? Any ideas or advice on how to fix it? Thanks John... Edited April 15, 2014 by Gaoler Quote Link to post
Gaoler 83 Posted April 15, 2014 Author Report Share Posted April 15, 2014 I can hear a slight hiss coming from the filling port on the rifle..!! Is it easy to fix? Quote Link to post
whistler1 26 Posted April 16, 2014 Report Share Posted April 16, 2014 Just to be a 100% sure,fill the cylinder,and remove it from the gun,see if it empties.Your dust cover will make a popping noise also if its leaking through the fill port hole.Link below shows you how to remove the end,to replace the o-rings.Not done it on an hw cylinder,but have done one on a v-mach,procedure is the same.I was okay,i just removed the fill port valve,gave it a couple of blows,made sure there was no crap on it,and it fixed my leak. http://www.hw100tuning.co.uk/index.aspx?pageid=2386988 hth Brian Quote Link to post
Gaoler 83 Posted April 16, 2014 Author Report Share Posted April 16, 2014 Great, thanks,How do I take the air reservoir off the rifle, never had it off the gun in 2 years?? Quote Link to post
secretagentmole 1,701 Posted April 18, 2014 Report Share Posted April 18, 2014 Twist in an anti clockwise manner, like removing the cylinder from the mark one version! Quote Link to post
Gaoler 83 Posted April 18, 2014 Author Report Share Posted April 18, 2014 Unscrewed the air reservoir, screwed it back on, it stopped leaking..!! Result..!! Quote Link to post
Gaoler 83 Posted April 20, 2014 Author Report Share Posted April 20, 2014 Hello All, I have decided to have the HW100 serviced, it is now 3 years old. Does anybody know where is a good place to have it serviced? Thanks John... Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.