Anschutz 15 17, Cocking Issue

[Dan Outdoors 13]

Hi, I just got a new anschutz, I think I've acidently de cocked it while removing the bolt and it no longer retains the firing position when the bolt is down, any ideas of how to fix it? Thanks

[Elliott 436]

Hi, I just got a new anschutz, I think I've acidently de cocked it while removing the bolt and it no longer retains the firing position when the bolt is down, any ideas of how to fix it? Thanks

Struggling to understand what you mean Dan. I have the same rifle so I'm sure I could help. Have you turned the bolt whilt out and removed the spring and firing pin?

[Dan Outdoors 13]

Hi Elliot, think I pulled the trigger when removing the bolt causing the pin to fire, then when I put the bolt back in it wasn't holding the hammer part of the bolt back? I just removed the stock and put the safety back and forth and it seemed to fix it, not sure how or why but it seems ok now, not sure if that's any clearer, have you had that happen? Cheers

 

Dan

[Elliott 436]

Hi Elliot, think I pulled the trigger when removing the bolt causing the pin to fire, then when I put the bolt back in it wasn't holding the hammer part of the bolt back? I just removed the stock and put the safety back and forth and it seemed to fix it, not sure how or why but it seems ok now, not sure if that's any clearer, have you had that happen? Cheers

 

Dan

 

Not sure on that one Dan but it sounds like you've got it sorted

[Neils 1]

Ive got a 1417 and if you do decock the bolt you can recock it by grabbing the front bit and twisting it back until it snaps into the cocked position