DTS01 23 Posted February 7, 2014 Report Share Posted February 7, 2014 hi guys im using a hawke panorama EV 3-9x40 mildot scope with illuminated reticle on my BSA R10, and i find i have trouble focussing once i push the magnification past about 5x it seems any more maginification my eyes seems to want to focus on EITHER the reticle or the target - never both. Up to 5x its perfectly clear and my grouping is good at 30yards i have set the reticle focus correctly by glancing at it and looking away and adjusting etc but it just seems to fall down a little at 6x plus. any ideas? Thanks in advance Dan 1 Quote Link to post
secretagentmole 1,701 Posted February 9, 2014 Report Share Posted February 9, 2014 Have you tried adjusting the objective lens? You know the big one at the front? Quote Link to post
DTS01 23 Posted February 9, 2014 Author Report Share Posted February 9, 2014 It isn't adjustable. I don't think..... Quote Link to post
Daz39 962 Posted February 9, 2014 Report Share Posted February 9, 2014 I had the same issue and found that the lighter it was the better the dual focus or if you lamped again it helped. Quote Link to post
DTS01 23 Posted February 10, 2014 Author Report Share Posted February 10, 2014 ah i see - cant say it was a particularly bright day when i noticed it so il check it out thanks Quote Link to post
lurch_917 4 Posted February 12, 2014 Report Share Posted February 12, 2014 you will find that these are parallax set to about 100 yds so on high mag at shorter ranges you can get the effect your getting . there is a way off adjusting these you remove the front cover ring , set your mag to your desired mag then look in the front you will see a ring with 2 slots adjust this either in or out to get your focus for your desired range say 30yds. Quote Link to post
DTS01 23 Posted February 12, 2014 Author Report Share Posted February 12, 2014 Ah gotcha. I might try that if I can't get on with it Thanks Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.