carlstoke 34 Posted February 6, 2014 Report Share Posted February 6, 2014 Hi, anyone fitted a v mach kit to a mk 3 tx 200, fitted this kit to mt gun but the seal is very tight , should i size it down? Running the stock seal at the moment but is a bit of a waste not to use the v mach seal, info much welcomed, thanks 1 Quote Link to post
Lewis Ste 245 Posted February 6, 2014 Report Share Posted February 6, 2014 After use the piston seals size themselfs to the compression chamber so If it's not broke don't change it, if the seal works fine and no lose of air how is the v-Mach going to better it? 1 Quote Link to post
carlstoke 34 Posted February 6, 2014 Author Report Share Posted February 6, 2014 Good point there mate thanks for the reply. Quote Link to post
davyt63 1,845 Posted February 6, 2014 Report Share Posted February 6, 2014 hi buddy have you access to a chronograph? when i fitted the kit to mine it took it to 12.4fpe so be careful buddy. Quote Link to post
Skot Ruthless Teale 1,701 Posted February 7, 2014 Report Share Posted February 7, 2014 my old 97 shot better with the hw seal rather than the vmach seal! probably because that seal was already 'bedded in' or 'sized' Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.