AUSSIE HUNTER 0 Posted February 3, 2014 Report Share Posted February 3, 2014 Hi Guys, i just need some advice on the correct way to mount my N550 onto a Sako .22 P94S action, i believe the dovetails are 11mm. The mount on the N550 is for a picatinney rail i think, it seems far to wide to be able to tighten up so i bought some adapters which i dont think are really up to the job. When i sighted the scope in, the reticle is off to one side, is this normal? Does anyone use Sportsmatch RB5 adapters? i appreciate these will raise the scope by another 19mm but they are built like tanks and would, i think be more stable than my present set up. Are these likely to centre the scope thus enabling the reticle to be in the centre of the sight picture? Regards. Neil. Quote Link to post Share on other sites
the big chief 3,099 Posted February 3, 2014 Report Share Posted February 3, 2014 Its the mounts why its off mine did the same get some mounts with a weaver rail on top and that should sort it Quote Link to post Share on other sites
AUSSIE HUNTER 0 Posted February 3, 2014 Author Report Share Posted February 3, 2014 Thanks, i think your talking about the really low adapters which are the ones i was using, maybe they are too cheap and not made to a fine enough tolerance. I don't mind the extra 19mm the Sportsmatch will give me, after all i had to build up the cheek piece to get a good sight picture anyway. Keep the suggestions coming please., Quote Link to post Share on other sites
the big chief 3,099 Posted February 3, 2014 Report Share Posted February 3, 2014 I got my mounts mild down so mine is back in the midle Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.