Country Joe 1,411 Posted July 21, 2014 Report Share Posted July 21, 2014 Av got one a use it for ferreting and mooching with the dogs it's brilliant and goes anywhere with a set of half decent tyres on took the back seats out and put a aluminium boot liner in. I know nothing about cars, thinking of acquiring a Jimnay, is there anyway of putting the back seats flat and putting an aluminium cover over, as I would like to keep the back seats in, just looking to take a dog carrier and room for ferreting equipment. 1 Quote Link to post Share on other sites
dytkos 17,793 Posted July 21, 2014 Report Share Posted July 21, 2014 Yes Quote Link to post Share on other sites
Country Joe 1,411 Posted August 22, 2014 Report Share Posted August 22, 2014 If removing the back seats would it be good to use a sheet of ply to keep clean? Quote Link to post Share on other sites
dytkos 17,793 Posted August 23, 2014 Report Share Posted August 23, 2014 If its a newer one, the back seats will fold completely flat, if its an older model, you'll need a socket set and a bit of faffing but you can get them out in about 15 minutes. I ripped mine out and ply lined it. You will at least need a board in the back with spacers underneath as onece the seats are out the back has an uneven floor pan. HTH Cheers, D. Quote Link to post Share on other sites
Country Joe 1,411 Posted August 23, 2014 Report Share Posted August 23, 2014 Thanks for that, ATB 1 Quote Link to post Share on other sites
patterdalejoel 669 Posted August 23, 2014 Report Share Posted August 23, 2014 Av got one a use it for ferreting and mooching with the dogs it's brilliant and goes anywhere with a set of half decent tyres on took the back seats out and put a aluminium boot liner in. I know nothing about cars, thinking of acquiring a Jimnay, is there anyway of putting the back seats flat and putting an aluminium cover over, as I would like to keep the back seats in, just looking to take a dog carrier and room for ferreting equipment. the back seats will lay almost flat if you remove the headrests, but not completely flat, not in mine anyway. i keep meaning to make a plywood tray to do as you do without having to remove the seats. but yes they will lay, almost flat. Quote Link to post Share on other sites
dytkos 17,793 Posted August 24, 2014 Report Share Posted August 24, 2014 Av got one a use it for ferreting and mooching with the dogs it's brilliant and goes anywhere with a set of half decent tyres on took the back seats out and put a aluminium boot liner in. I know nothing about cars, thinking of acquiring a Jimnay, is there anyway of putting the back seats flat and putting an aluminium cover over, as I would like to keep the back seats in, just looking to take a dog carrier and room for ferreting equipment. the back seats will lay almost flat if you remove the headrests, but not completely flat, not in mine anyway. i keep meaning to make a plywood tray to do as you do without having to remove the seats. but yes they will lay, almost flat. The newer ones will lay completely flat, you've got to move something though underneath. A fellow I know has done it, he got the info off You Tube I think. Did you see the football results yesterday mate? Cheers, D. Quote Link to post Share on other sites
Dewclaw69 484 Posted August 26, 2014 Report Share Posted August 26, 2014 i've had a 1999 jimny for 2 years and i love it. gets anywhere that landrovers do and places they can't as its narrower. with the back seats folded and a board made up to account for the difference in height theres room enough for anything. for the money there's nothing to touch them. 2 Quote Link to post Share on other sites
lifelong cumbrian 1,826 Posted August 26, 2014 Report Share Posted August 26, 2014 Been looking into this subject myself, found a couple of things, https://www.google.co.uk/search?q=folding+seats+in+suzuki+jimny&rlz=1T4ACAW_enGB411GB411&tbm=isch&tbo=u&source=univ&sa=X&ei=z9n8U_iKCrLT7AaCt4GICQ&ved=0CCYQsAQ&biw=1366&bih=560 http://suzuki4u.co.uk/forum/viewtopic.php?t=1028 1 Quote Link to post Share on other sites
Dewclaw69 484 Posted August 26, 2014 Report Share Posted August 26, 2014 its an easy job to cure the difference in level when the rear seats are folded down. 1/2" ply 900mmx300mm spaced up on suitable sized timber bearers. i think mine are 3x2's. it can even stay in when the seats are up and being used. a 10 minute / few quid fix. Quote Link to post Share on other sites
dytkos 17,793 Posted August 27, 2014 Report Share Posted August 27, 2014 Been looking into this subject myself, found a couple of things, https://www.google.co.uk/search?q=folding+seats+in+suzuki+jimny&rlz=1T4ACAW_enGB411GB411&tbm=isch&tbo=u&source=univ&sa=X&ei=z9n8U_iKCrLT7AaCt4GICQ&ved=0CCYQsAQ&biw=1366&bih=560 http://suzuki4u.co.uk/forum/viewtopic.php?t=1028 Good info mate Cheers, D. Quote Link to post Share on other sites
dytkos 17,793 Posted August 30, 2014 Report Share Posted August 30, 2014 Mine passed the MOT yeaterday - after I'd spent £140 on two of these bad boys Cheers, D. Quote Link to post Share on other sites
patterdalejoel 669 Posted August 31, 2014 Report Share Posted August 31, 2014 Av got one a use it for ferreting and mooching with the dogs it's brilliant and goes anywhere with a set of half decent tyres on took the back seats out and put a aluminium boot liner in. I know nothing about cars, thinking of acquiring a Jimnay, is there anyway of putting the back seats flat and putting an aluminium cover over, as I would like to keep the back seats in, just looking to take a dog carrier and room for ferreting equipment. the back seats will lay almost flat if you remove the headrests, but not completely flat, not in mine anyway. i keep meaning to make a plywood tray to do as you do without having to remove the seats. but yes they will lay, almost flat. The newer ones will lay completely flat, you've got to move something though underneath. A fellow I know has done it, he got the info off You Tube I think. Did you see the football results yesterday mate? Cheers, D. i dont bother looking at the lower leagues mate, suprised you werent too busy buggering those horses Quote Link to post Share on other sites
Dewclaw69 484 Posted September 1, 2014 Report Share Posted September 1, 2014 Mine passed the MOT yeaterday - after I'd spent £140 on two of these bad boys Cheers, D. i'm running the same tyre . dynapro atm. they're cracking on and off road. getting 35 mpg too on em. Quote Link to post Share on other sites
dytkos 17,793 Posted September 1, 2014 Report Share Posted September 1, 2014 Av got one a use it for ferreting and mooching with the dogs it's brilliant and goes anywhere with a set of half decent tyres on took the back seats out and put a aluminium boot liner in. I know nothing about cars, thinking of acquiring a Jimnay, is there anyway of putting the back seats flat and putting an aluminium cover over, as I would like to keep the back seats in, just looking to take a dog carrier and room for ferreting equipment. the back seats will lay almost flat if you remove the headrests, but not completely flat, not in mine anyway. i keep meaning to make a plywood tray to do as you do without having to remove the seats. but yes they will lay, almost flat. The newer ones will lay completely flat, you've got to move something though underneath. A fellow I know has done it, he got the info off You Tube I think. Did you see the football results yesterday mate? Cheers, D. i dont bother looking at the lower leagues mate, suprised you werent too busy buggering those horses Touche! What horses? Cheers, D. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.