Jln 5 Posted January 12, 2014 Report Share Posted January 12, 2014 I have a pre 2006 s410 carbine, when I bought the rifle it had around 150 bar in the cylinder so set my scopes zero. Now it's fine untill it drops to 100 bar, at 100 bat the pellet will contact the target 1 mill dot low. So I decided to fill full at 190 bar, shot a few pellets and they all made contact 1 mill dot high?? This is at around 10 meters, I was going to use this gun for hunting but can't rely on it if it can't be fixed. I'm assuming that this can't be right? Is there any one that can help me out? Many Thanks Jamie Quote Link to post
Danny Fireblade 66 Posted January 12, 2014 Report Share Posted January 12, 2014 You need to do a full shot string over the full range of your cylinder. Use a chrono so then you will be able to see where the sweet spot is & also the power curve. Also join http://www.airarmsownersclub.com as that will answer all your questions. Quote Link to post
davyt63 1,845 Posted January 13, 2014 Report Share Posted January 13, 2014 hi Jamie only fill to 170/160 bar and shoot down to 110/105bar this is the rifles sweet spot,it may differ between rifles but only buy 10/15 bar enjoy your s410 deadly accurate rifles Quote Link to post
Jln 5 Posted January 14, 2014 Author Report Share Posted January 14, 2014 Yeah that makes sence thanks!! Quote Link to post
lurch_917 4 Posted January 25, 2014 Report Share Posted January 25, 2014 as Davey says I have the aa410 carbine and it best from 185b down to about 110 bar pellet on pellet at 22yds why 22yds well that's how long my garden is Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.