gjfchippy 1 Posted January 8, 2014 Report Share Posted January 8, 2014 Hi,my 1st proper post.I would like some help/advice please.Just purchased a 2nd hand brocock contour xl s6.I tested it f2f seemed fine, but on sunday on testing the gun, as i had changed to higher mounts and was rezeroing the pellets were flying all over the place.I noticed that it had been clipping baffles inside silencer so took silencer off and the results were not much better,still having odd groups.I have tested it again today and could get a couple of pellets, pellet on pellet,then they start flying around anything from 40mm out at 30yds.I am refilling back up after 30-40 shots to 190bar 1 Quote Link to post
Lewis Ste 245 Posted January 8, 2014 Report Share Posted January 8, 2014 Have you changed pellets? Try a few other brands Quote Link to post
gjfchippy 1 Posted January 8, 2014 Author Report Share Posted January 8, 2014 Yes mate,was given superdomes with gun,also tryed accupells and webley vmx they all react the same.Check scope mounts all fix securely,thanks for reply Quote Link to post
shadow_sniper 47 Posted January 11, 2014 Report Share Posted January 11, 2014 Hi mate got a concept s6 try jsb exacts or as fields mine loves them. Also could be mags if they are alloy try aluminum. At Nick Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.