Stripping & Tuning Hw97Kt Blackline

[Marksman 934]

New from GeordiehuntersTV

Part one of the 97KT strip & tune

Darryl

 

[gosling1960 191]

Enjoyed that Darryl.

[Marksman 934]

Cheers mate

 

Part 2 should be sorted mid week if I manage to get home otherwise it will be the weekend.

 

Darryl

[risingfriend 1,042]

Nice one Darryl if it shoots as well as the 97kt you fettled of which i tryed at the oct meet, then happy days mate i had noticed the difficulty getting it apart on the vid mate do you think its true regards loc-tite now did you notice any? nice vid look forward to part 2

[Marksman 934]

I never have it a thought, but now that you mention it mate I did clean off some white residue from the threads of the trigger housing.... Hmmm

Will have to watch out for that on the next one

 

As for shooting well mate it has a 2fps spread over the chrono.... ;-)

 

https://skydrive.live.com/redir?resid=822B79401FF1416F!248&authkey=!AMsFN155iv74T-M&ithint=video%2c.mp4

 

Darryl

[risingfriend 1,042]

Cant complain mate at 2fps spread, most regged pcps cant achieve that

[Marksman 934]

Yep well happy with it mate....

 

Darryl

[Gaz 177 263]

Nice little vid that Darryl

[villaman 9,983]

Very good vid Darryl . I have also been told about lock tight on the new ones as well .

Be good if you could do a vid on the HW100 for some of the Hw boys

[Marksman 934]

Very good vid Darryl . I have also been told about lock tight on the new ones as well .

Be good if you could do a vid on the HW100 for some of the Hw boys

Yep no probs mate, only trouble being I don't want to be liable for anyone getting injured trying to follow the video so gotta be careful....

 

Darryl

[Mister Gain 1,764]

Really enjoyed the video, looking forward to part 2.

[Marksman 934]

Here's Part 2 guys...... Enjoy!!

 

 

Darryl

Edited December 17, 2013 by Marksman

[sweet pea 2]

Great videos mate thanks for posting.

[davyt63 1,845]

hi Darryl

you need to get a cordless drill,its a lot easier.put the piston guide in the drill tighten chuck,wet n dry between fore finger and thumb,and squeeze the trigger slowly till desired polish acquired!

 

the inside of the compression tube,go to a diy store ,buy some spare rad rollers,wrap the wet n dry around it,slide a 6mm threaded bar inside the roller,insert into drill bingo! all polished in seconds. or just buy a polishing wheel

 

keep the vids coming

[Marksman 934]

hi Darryl

you need to get a cordless drill,its a lot easier.put the piston guide in the drill tighten chuck,wet n dry between fore finger and thumb,and squeeze the trigger slowly till desired polish acquired!

 

the inside of the compression tube,go to a diy store ,buy some spare rad rollers,wrap the wet n dry around it,slide a 6mm threaded bar inside the roller,insert into drill bingo! all polished in seconds. or just buy a polishing wheel

 

keep the vids coming

Cheers for the tips Davy