fay 75 Posted December 15, 2013 Report Share Posted December 15, 2013 I BOUGHT AN AGS SCOPE BUT IT WILL NOT LET ME ZERO IN AT 5O YARDS ITS DROPED BY 3 INCHES AND IT WILL NOT LET ME RISE IT UP I HAD TO OTHER PEOPLE LOOK AT IT AND IVE PUT AT LEAST 4 BOXES OF CCI SUBSONICS IN IT AND ITS STILL NOT SET DUE TO THE FACT I CAN NOT CLICK IT UPO ANY MORE Y WOULD THIS B ANY HELP PLEASE I WAS TOLD THE MOUNTS MIGHT NEED TO B HIGHERD BUT CANT PUT MY FINGER ON IT Quote Link to post
Craig83 52 Posted December 15, 2013 Report Share Posted December 15, 2013 Don't force it first of all. Remove the scope and check the mounts are seated correctly. Then re set the scope up. Be careful thou you might find the round goes high or low. Failing that the scope is knackered. 1 Quote Link to post
fay 75 Posted December 15, 2013 Author Report Share Posted December 15, 2013 I BOUGHT THE SCOPE 4 WEEKS AGO AND HAVE BEEN HAVING TO RESET IT EVERY TIME I WENT OUT WHICH HAS BEEN ABOUT 5 TIMES IN FOUR WEEKS AND AT LEAST 4 BOXES WHICH IS WAY TO MUCH IS THERE ANY WAY I CAN I WIND IT IT DOWN AND DO IT AGAIN SINCED IT WONT LET ME GO HIGHR THAN 50 YARDS AS IT IS WOUND UP ALL THE WAY Quote Link to post
shropshire dan 467 Posted December 15, 2013 Report Share Posted December 15, 2013 I'd wind it all the way down and start again mate. Failing that try some higher mounts Quote Link to post
iana 25 Posted December 15, 2013 Report Share Posted December 15, 2013 You may need to shim the scope up. First set it back to half way on the turrets. Then shim the Back up. 1 Quote Link to post
mushroom 13,272 Posted December 15, 2013 Report Share Posted December 15, 2013 If the scope is a cheapie or damaged it could be that the kick that knocks it out 1 Quote Link to post
fay 75 Posted December 15, 2013 Author Report Share Posted December 15, 2013 PAYED 110 FOR IT BRAN NEW SO WHAT CAN I USE TO SHIMM IT AND HOW IVE READ THAT I COUNT THE CLICKS UP AND DOWN AND REDUCE BY HALF TO BRING IT BACK TO CENTER IS THIS CORRECT 1 Quote Link to post
mushroom 13,272 Posted December 15, 2013 Report Share Posted December 15, 2013 PAYED 110 FOR IT BRAN NEW SO WHAT CAN I USE TO SHIMM IT AND HOW IVE READ THAT I COUNT THE CLICKS UP AND DOWN AND REDUCE BY HALF TO BRING IT BACK TO CENTER IS THIS CORRECT Yes mate count the clicks and center it but that will not zero it to your gun trial and error needed. Make sure the mounts are not overtightened on the scope or this will proper do it in but not too loose. Also make the mounts really tight on the gun. If you are having issues with it not keeping zero and the mounts are tight it can only be either it's fooked or ya gun is Quote Link to post
fay 75 Posted December 15, 2013 Author Report Share Posted December 15, 2013 CHEERS MATE JUST DONT GET IT LIKE IT WAS AT 5O THEN IT WENT OF AND STILL WONT STAY WORST TING I EVER BOUGHT LOL Quote Link to post
Craig83 52 Posted December 15, 2013 Report Share Posted December 15, 2013 You need a MTC Genesis 5-20x50 £250, just so happen to have one for sale Quote Link to post
charlie caller 3,654 Posted December 16, 2013 Report Share Posted December 16, 2013 If the scope is a cheapie or damaged it could be that the kick that knocks it out what from a .22 rf? shim the scope, if it wont hold zero after you have done that, change the mounts, if it still wont its Donald ducked. Quote Link to post
The Seeker 3,048 Posted December 16, 2013 Report Share Posted December 16, 2013 PAYED 110 FOR IT BRAN NEW SO WHAT CAN I USE TO SHIMM IT AND HOW IVE READ THAT I COUNT THE CLICKS UP AND DOWN AND REDUCE BY HALF TO BRING IT BACK TO CENTER IS THIS CORRECT Use anything that is thin to shim, most people use old negative film or something similar Quote Link to post
Cliff Ray 185 Posted December 16, 2013 Report Share Posted December 16, 2013 Try adjusting the scope in lower case...... Quote Link to post
mushroom 13,272 Posted December 16, 2013 Report Share Posted December 16, 2013 If the scope is a cheapie or damaged it could be that the kick that knocks it out what from a .22 rf? shim the scope, if it wont hold zero after you have done that, change the mounts, if it still wont its Donald ducked. Photo film or stuff like is perfect if you can't reach zero but please tell me how this will stop a scope LOSING zero?? Quote Link to post
Blackbriar 8,569 Posted December 16, 2013 Report Share Posted December 16, 2013 If it keeps losing zero, after you've set it up, surely the scope is moving during firing? Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.