Which Gun Lubricants Do I Need To Service A Tx200

[dangerousdan 16]

Hi all.

As per the title really.

 

There seems to be alot of conflicting advice on molly greases pastes and macarri tar substances and I dont know what to buy. This will be my first go at this I need it to be simple.

 

Thanks

[bilbobagins 92]

I just use a smear of the black moly grease from halfords on the spring and guide and a thinner smear of silicone grease on the piston washer works ok in my guns

[secretagentmole 1,701]

Why not buy the service kit from Air Arms and get the correct lubricants as part of the kit?

[thursodog 353]

Bisley gun grease.

A tub for a fiver has over a dozen springers for me and still has enough for another dozen or so.

Less is best.

A wee smear to the piston and seal, another tiny smear on the inside of the piston cylinder and lastly a little smear to the spring.

A small dollop on yer finger the size of your pinky nail is all that's needed, no more.

You could also strip the trigger, clean all the crap that the makers put in and apply a little dry lube to the sears.

I use WD40 dry lube which I apply with a darning needle, its in liquid form and dries as a very fine film of grease.

Job done [BANNED TEXT]

 

C