Light Force 170 Lamp Connection!!

[dommorris92 64]

W**NK is a understatement . . What do people swap the cig plug for and how do you do it . Pictures would help please !!

[paulus 26]

W**NK is a understatement . . What do people swap the cig plug for and how do you do it . Pictures would help please !!

just cut it off and wire direct to the battery or use a lawn mower connector, if possible put an inline fuse in on the positive wire

[jeppi26 1,855]

Cut off the connecter and put spade connecters on always work for me

[trigger2 3,137]

i agree they are shit for the money.

 

the first thing i do when i buy a lightforce lamp is rewire the fecking thing.

 

i do away with the switch aswell, ive got it so as i just touch 2 wires together alot less hassel than swiches and its silent aswell.

[lifelong cumbrian 1,826]

The connector into the lithium battery is as bad as the cigar plug and the hard coily cable is shit. I replaced the whole lot.

[AirgunGuy 362]

Stripped mine out and re-soldered the connections. Seems fine so far ;-)

[MIK 4,756]

Stripped mine out and re-soldered the connections. Seems fine so far ;-)

solder is no good always use block connecters so if it breaks you can fix it

[Hot Meat 3,109]

The connector into the lithium battery is as bad as the cigar plug and the hard coily cable is shit. I replaced the whole lot.

Fancy telling me what you done pal? I got a lithium here I think got a loose wire or summat and the battery connection Is starting to go, I'm scared to open it lol I gonna order a new 1 in next couple days so I'll open old one and see if I can renew connections .. tips would Be great lol

[AirgunGuy 362]

 

Stripped mine out and re-soldered the connections. Seems fine so far ;-)

 

solder is no good always use block connecters so if it breaks you can fix it

Connector block doesn't fit inside the handle or the male fag lighter and won't connect the wires to the fittings in either.

 

As for being no good...must've been my imagination!!!

[jamesmc 582]

I always re-wire them....been caught out in the middle of no where a few times,but you learn from your mistakes....lol.

Great lamps....piss poor wiring...lol...

[lifelong cumbrian 1,826]

 

The connector into the lithium battery is as bad as the cigar plug and the hard coily cable is shit. I replaced the whole lot.

Fancy telling me what you done pal? I got a lithium here I think got a loose wire or summat and the battery connection Is starting to go, I'm scared to open it lol I gonna order a new 1 in next couple days so I'll open old one and see if I can renew connections .. tips would Be great lol

 

I never broke into the battery mate, mine is a lance but same set up.

http://www.thehuntinglife.com/forums/topic/299359-your-views-on-lightforce-lance/page-2

[jamesmc 582]

I soldered mine and its spot on.....each to their own...

[lifelong cumbrian 1,826]

I soldered mine and its spot on.....each to their own...

I solder mine also mate.

[AirgunGuy 362]

I soldered mine and its spot on.....each to their own...

Aye mate...mine holding up so far. Checked the connections I re-soldered a few times and seems fine...time will tell ;-)

[alan81 110]

I never bought the lithium battery I just bought the lamp cut of the cigar connection and wired it straight to a lawn more battery and never looked back.