Nikko Stirling

[jrobsm1 5]

does anyone no the aim points for this scope or is there a way to calibrate

[dhand62362 13]

I used chairgun, generic mildots on x9 mag

[jrobsm1 5]

and does it work perfect mate

[WoodsmanJim 160]

It'll all depend on a lot of factors. What rifle it's on, how it's mounted, the power level of the rifle, the caliber, the pellets... a ton of stuff. Chairgun is good if you have all the info required and know how to use it. But best way is to set up targets at measured distances and just practice shooting it. You'll soon see the point of impact differences at different ranges, I.e. zero-15yrds, zero-10yrds, zero+10yrds, zero+20yrds etc.... This is the best way to work out your aim points for your individual set up.

 

Jim

[dhand62362 13]

I use chairgun then fine tune with targets from 8 yds to 45 yds, you will need to chrono, measure scope height and know your pellet weight

[jrobsm1 5]

I put it all in to chairgun last night don't no the exact fps yet going to get it chronod today but at 70yrds it only dropped 4 inch 177 aa diablo field and it was punching through skirting board at that im thinking it may be running hot tbh my rapid at 26ftlb dropped more than that

Edited September 12, 2013 by jrobsm1