Stuart1985 256 Posted September 8, 2013 Report Share Posted September 8, 2013 Evening My newly purchased ns50 isn't working!!! The screen will not come on at all, the battery is fully charged and the red lights seem to be working, any suggestions? I am talking back to the shop I bought it from tomorrow. Cheers Stuart Quote Link to post
porkycrook 466 Posted September 8, 2013 Report Share Posted September 8, 2013 Is it the old sort with big battery? if so check the fuse that is inline on the battery wires. The one i had blew that fuse once and once only. I would also you join the "night vision" forum because they have some very good information that can be useful. Regards Roger Quote Link to post
secretagentmole 1,701 Posted September 9, 2013 Report Share Posted September 9, 2013 (edited) Make sure you have everything plugged in properly and aligned properly! Sounds stupid but it can make a difference. The red lights are the IR illuminator, so that means power is getting through to the main unit. Check that the lead that plugs into the camera body is pushed home fully and try moving the camera body about to see if you can get an image! If that fails, back to the shop! Edited September 9, 2013 by secretagentmole Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.