big napper 3,570 Posted August 31, 2013 Report Share Posted August 31, 2013 can any one tell me the recommended psi pressure for an air arms s200 mk3,, and roughly how many shots i should get from it , the pellets are .177 and what type of pellets work best in yours,, a few different questions there but i've not had one before so any info will be appreciated, cheers Quote Link to post
Phantom 631 Posted August 31, 2013 Report Share Posted August 31, 2013 My 200 is .22 cal and I get roughly 40 shots before having to compensate for pressure drop, so I should guess you will have about the same maybe more. The 200's are not that pellet fussy, but so far the tightest groups I've had at 30 yards are Air Arms Fields 5.51 and 5.52 thet gave me a grouping of about 8mm Edge to edge, followed by FX pellets (I cant get them now though) giving about 9 to 10mm groups E2E. Then came Crosman Premier Ultra Magnums about 10mm E2E groups. Bisley Magnums also produced tight groups but never bothered measuring them. You can fill the gun to 210 Bar, however my baby's SweetSpot (most consistent velocity and accuracy) starts around 180 bar down to 110/100 bar. Each gun may be different (especially between cal's) To find out the very best fill pressure and it's sweetspot you will need to use a chronograph (easiest method) or lots of time and shots using either graph paper or a decent metal rule (the way I did it). Tony 1 Quote Link to post
big napper 3,570 Posted August 31, 2013 Author Report Share Posted August 31, 2013 cheers for that tony, i did fill it today when i got it home and the gauge went up to 160 bar, 2400 ish psi and would'nt go any higher, i thaut it should have been higher, i thaut there might have been something wrong somewhere Quote Link to post
big napper 3,570 Posted August 31, 2013 Author Report Share Posted August 31, 2013 pretty much the same as phantoms, cheers for that, i will get some aa fields on Monday when shop is open, cheers for the info lads. Quote Link to post
Craig Fosse 286 Posted September 1, 2013 Report Share Posted September 1, 2013 Big napped, ur cyclinder may not have gone up be bucasuse ur drive tank is low on pressure (make sure u find somewhere to fill it up to 300 bar) my s200 is .177 I use 3 mags 30 for hunting filled up to about 170 psi. Pellet on pellet at 27 yards with aa fields mate! Cracking rifle! 1 Quote Link to post
big napper 3,570 Posted September 1, 2013 Author Report Share Posted September 1, 2013 cheers for that craig, my dive bottle has just been filled last week so is ok, do you know what else it could be as it was'nt quite 160 it was just less Quote Link to post
Stormspiel 17 Posted September 2, 2013 Report Share Posted September 2, 2013 Mine likes H&N barracuda match 4.52 (10.65 grain), tighter groups than the bisleys and just as good as AA Diabolos but harder hitting. Fill mine to 190 and get 40-45 shots with a diff of 15 fps (690-705) before dropping off steadily by about 3-4 fps per shot. If filled to 200 it's first 10 shots are 680 ish until it hits the sweet spot. 1 Quote Link to post
big napper 3,570 Posted September 2, 2013 Author Report Share Posted September 2, 2013 just filled it again today and still won't fill higher than 160 bar, could there be something wrong, cheers Quote Link to post
Phantom 631 Posted September 2, 2013 Report Share Posted September 2, 2013 My best guess is: A/..... Your Dive tank may be loosing pressure (just like the air cylinder on the gun; they can develop faults) Or B/..... The gauge may be have been knocked off calibration or even dodgy :-/A gentle test: Go set up a target on an A4 paper (with a good backstop) Mark the paper with a coloured dot. Zero (or check zero) as normal Aim at the same mark for every shot and count how many shots before you notice a significant drop in the point of impact. If you are getting around 40 shot's or more then it's likely to be the gauge. The good news is that a gauge is relatively cheap to replace If there is a significant drop in Point of impact then it's likely to be the tank. Well I say the tank, it's more likely to be the seals on the tank. Tony Tony 1 Quote Link to post
big napper 3,570 Posted September 3, 2013 Author Report Share Posted September 3, 2013 cheers for that tony, i can't try it out for a few days but i will definitely try that before any thing else. Quote Link to post
Craig Fosse 286 Posted September 4, 2013 Report Share Posted September 4, 2013 Toys advise is best mate, another one is to check ur rifle after u charge it just below 160, to see if its ur cylinder that could be loosing air as well, but Sounds to me like a seal in the tank (make sure the purge valve is done up tight as well 1 Quote Link to post
big napper 3,570 Posted September 6, 2013 Author Report Share Posted September 6, 2013 cheers for all your help lads, the pressure gauge is nackered on the filling bottle, Quote Link to post
Craig Fosse 286 Posted September 7, 2013 Report Share Posted September 7, 2013 Glad u got it sorted mate Quote Link to post
big napper 3,570 Posted September 7, 2013 Author Report Share Posted September 7, 2013 cheers pal Quote Link to post
Craig Fosse 286 Posted September 7, 2013 Report Share Posted September 7, 2013 (edited) No dramas Edited September 7, 2013 by Craig Fosse Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.