Jump to content

Recommended Posts

Hello all,

 

A field boundary hedge bottom is a haven for rabbits and I think trapping is the way to go. I am considering ovelapping the existing pig netting with a smaller rabbit proof mesh, then making rabbit sized holes in it for tunnel traps. What is the minimum length of netting to be worth doing and how far apart should the holes be?

 

Thanks.

Link to post

I have watched rabbits jump over plenty of rabbit proof fencing ,,,it always amazes me when I tell the owner,,, and they clearly don't believe me,,,, no they can't get over that,,, the hedge is to think and growing over the fence,,,,really so how they getting then....

 

Or a recant one I did,,,,was an exciting post and rail fence,,, with the rabbit netting attached to that,,, they had gone up two rails,,, about 2 foot 6,,,, now there's a big gap above that to the 3 rd rail,,, in fact I could get through it,,, but they still believed it to be high enough,,in fact this one was easy for the rabbits,, as they had a 3 by 2 to jump on to and through,,, I shot a few bunny and trapped a few,,, and told them to put the fence up to the top rail ,,, which they did,,,, of course I've never worked there again ,,,lol. The fence is too rabbit proof

Link to post

My latest permission the farmer got one side of a wood fenced in as next door rabbits where coming out of there . Christ knows what the contractors done but as said the rabbits are coming over it and the farmers trying to sue the contractor :yes::yes: . i just said why didn't you leave it as it was till i had a look and saw what i could do

Link to post

Just look at where the runs are already and use them to set your tunnels ........

Look and mark the fences now as to where the runs are,whilst the grass is high and the runs are evident. Rabbits will often use the same runs. So use that to your advantage.

 

If you come across rabbits hurdeling a fence or wall in the same spot on a regular basis. What would you do to use this to your advantage??

Link to post

Just look at where the runs are already and use them to set your tunnels ........

 

After my failed attempt at snaring in another field, I am not very confident I could set them in the right place. The grass has been nibbled short all around but not worn away in any particular runs.

Link to post

Fence snare them coming through the pig mesh fence

 

This particular section is overlooked by a cottage. At a fair distance but I thought drab tunnels would be more discreet. Besides, although I have managed to snare a few foxes I have never managed to snare a rabbit. Despite watching Glenn Waters' DVD and getting snares from Trapworks.

Link to post

 

Just look at where the runs are already and use them to set your tunnels ........

Look and mark the fences now as to where the runs are,whilst the grass is high and the runs are evident. Rabbits will often use the same runs. So use that to your advantage.

 

If you come across rabbits hurdeling a fence or wall in the same spot on a regular basis. What would you do to use this to your advantage??

 

 

The grass is all very short. Eaten in the field by sheep and under the hedge by rabbits, I suppose. I know most of you guys could tell at a glance where the runs are but I am seriously bad at snaring rabbits. I have even tried snaring in the snow in the past but never caught.

 

I am keen to get rid of these rabbits as we are planning to re-seed an adjacent field in the autumn and don't want them to make a mess. Mostly I can clear the area by setting Fenns down holes, something I have been successful at. However I can see (in the distance) rabbits leaving the field to these burries where I can't access the holes. They are very shy as my neigbour insists they are controlled by his air-rifle wielding mate. Having seen his mate in action it is a only a shame I can not sell tickets.

  • Like 1
Link to post

 

Fence snare them coming through the pig mesh fence

 

This particular section is overlooked by a cottage. At a fair distance but I thought drab tunnels would be more discreet. Besides, although I have managed to snare a few foxes I have never managed to snare a rabbit. Despite watching Glenn Waters' DVD and getting snares from Trapworks.

 

the snares will be less visable then a tunnel.keep practicing with the rabbit snares you will get there in the end,if you can snare foxes you aint doing to bad

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By sparky the hunter
      Hi Guys
      I have been contacted by the parish council as rabbits are causing a lot of damage in the small park next to the village school. The rabbits are travelling in from a neighboring disused garden but the owner does not want any measures taken against them even though she lectured me for ten minutes about the damage they are causing in her garden! So shooting and ferreting are out of the question so cage traps are the best option.  Have you guys got any recommendations for suppliers and any hints would be appreciated. Pegandgun on this forum seems to be a user of cage traps?
    • By Ratmanwan3
      found this today at an antique show. Obviously a trap of some discription so got it for my little collection. After a bit of digging its a Sara patent rabbit trap from around 1905. Still working but abit weak. Any trap collectors on here shed any more light on it? 
    • By hedge wanderer
      After reading through a few other discussion regarding the fenn mk6 being the only commercially available rabbit trap, in which to set in holes, and with many regarding it as being far less humane and simply not for the job as the jubys and imbras were, I thought a discussion on what would make a more effective, yet lightweight design, possibly taking features from all the traps mentioned above would make an appropriate and possibly, interesting topic.
      anyone with suggestions on what they believe makes the fenn not so ideal for the job and how it could be improved (possibly the ideal design for a mk2 'rabbit') and what makes the imbras and jubys absolutely powerhouses of rabbit killing machinery, please feel for free to put your opinions forward and get the ball rolling
×
×
  • Create New...