Help Tx200 Pellets Won't Fit And Grouping Huge

[ryanod90 17]

Hi folks

 

I bought a tx200 new and I have only used just over 200 pellets, the pellets I'v been using are bisley 5.5mm .22 and the fit was very tight on them going into the gun.

 

I asked my local gun dealer about this and he said that it is ment to be like that. So I went out the following evening and tryed to zero in my gun again and the groupings were about 7 inches at 25 yards which I thought this mite be down to my scope then everything was tightened up and still no joy,

 

Then I fired and a pellet it made a different noise than usual and when I tryed to fit another pellet it it would not fit at all even when applying alot if pressure ,

 

So my question is what the f*$k is going on with my gun, the people I bout it off said I could bring it back and change it, but just want to see if its something I done wrone or can fix myself

 

Any help will be much appreciated

Thanks Ryan

[gurtwurz 792]

Hi mate, some pellets are a crap fit in some barrels so it's probably just a case of trying a few brands out and seeing which fit and group best for yours. Most air arms rifles get on well with air arms pellets so thats probably a step on the right direction, also jsb's and sometimes falcon accuracy plus. It's one of those annoying things about air guns in that you could have two rifles that are the same brand, same model yet like a different type of pellet... Hope this helps

[BenjaminCadd 109]

As above try somme AA feild or even some RWS Superfeild and see how you get on, but 7" is alot, are you certain the scope is ok?

[ryanod90 17]

I have a marks man in the army looking at it this weekend thanks for the help folks il get those pellet see which is best thanks again

[ryanod90 17]

Oh but can anyone tell me why the pellets I was using wont fit into the barrel ?

[bigmac 97kt 13,816]

Get the jsb 15,89 exact jumbo,s my tx loved them and the groupings were mint i only use jsb,s in all my rifles there that good atvbmac :thumbs:

[rabbitcatcher 1 287]

Make sure your scope isn't moving with the recoil

[risingfriend 1,042]

Oh but can anyone tell me why the pellets I was using wont fit into the barrel ?

Different barrels like different pellets Mate, Hence the reason for differing head sizes on pellets. My airwolf likes 4.50 heads hw100 likes 4.52 and 4.53

[Lancashire Hunter 22]

Bisley are normaly a fac pellet. But as for the tight fit very unsure could be your gun is a 5.5mm and pellets could be a 5.6.

As for the unusual sound when you fired a shot you might of had a dud pellet or you blew the skirt of the pellet. Best bet try a few of the decent brands aa fields, accupels, rws super domes ect and see which groups better.

[ryanod90 17]

Thanks for all the help folks,

Went down to my gun dealer and tryed to fit in 6 different type of pellets and NONE would go in and the pellets are 5.5 mm . Seems the pellet holder has shrunk or something , looks like I have to apply for my firearms export to send back to my gun dealer I bough it of over there ( who was very understanding and will refund any postage costs,

Thanks again lads

[barrywhite 282]

I wonder if your breach is damaged or you have now got the skirt of a pellet stuck in your barrel .the funny noise may have been the head coming of a pellet leaving the skirt behind .

[dwibzy 2]

Hiya mate I agree with barrywhite check there not a skirt stuck in the barrell. As for pellets I use webley accupells they keep pretty tight grouping but as others said above all rifles are different so trail n error im afaid hope you get it sorted they are a awesome rifle.

[barrywhite 282]

I wonder if the cylinder is crashing into the end of the barrel and this is making the barrel opening for pellets close up .