Logun Combi Pump Helllllllp Remove Please

[slave 33]

Which model is it

early model http://www.ebay.co.uk/itm/Logan-Air-Rifle-Pistol-Pre-Charged-PCP-Gun-Stirrup-Hand-Pump-Valve-Hose-/221225995096?nma=true&si=qgHIB1WIMEGgo8n%252BNiFRbXvNgIY%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557

 

early fx model http://www.ctico.com/logun.htm

 

intermediate model http://www.gunstar.co.uk/Air-Rifles/Logun-S-16-S-gun-for-sale-gs134169.aspx

 

late model http://www.ebay.co.uk/itm/stirrup-pump-air-rifle-pre-charged-webley-logun-/330951191788

 

You could email Freddie Axleson direct at Fx but people say fx take forever to respond http://www.fxairguns.com/

 

Put a post up on the Fx owners club http://www.fxoc.info/

 

Contact Asi who are the official importers

ASI Ltd

Suffolk

Phone: +44 1728688555 +44 1728688555 info@a-s-i.co.ukwww.a-s-i.co.uk

[Andy_c 210]

This one

F*****g thing

[slave 33]

This one

F*****g thing

I would contact asi explain the problem people say they are good at sorting things out if you have no joy email Freddie send him a photo explain the problem ask them if this pump has the spring and the rubber ball

Edited August 15, 2013 by slave

[Andy_c 210]

This came with it in the box

No idea where it goes!!??

[Andy_c 210]

Mind you 5 and 7 don't seem to seperate?

[slave 33]

Mind you 5 and 7 don't seem to seperate?

5 should unscrew from 7 inside is the check valve + o ring pw104 and spring cs782 a worn check valve o ring is the most common problem with these pumps

[Andy_c 210]

The way I've recieved the pump the pw104 was in the top of number 5 and its a different type of pw104

[Andy_c 210]

U fancy a go at it?

[slave 33]

I think the best plan would be to contact asi or fx obtain the correct schematic diagram blueprint it to the diagram.

Have you stripped it since it was working maybe an o ring has picked up or torn

[Andy_c 210]

No all the orings are fine

[slave 33]

Mind you 5 and 7 don't seem to seperate?

I had a think about this these pumps need 2 valves to work.your pump has no rubber ball and the valve is different to pw104 and there was no spring also it was on top of part 5 this means it must do the job of the rubber ball and seal on the down stroke/and let air in on the up stroke. I think the other valve with the spring will be the same as pw104 and be between part 5 and 7

[Andy_c 210]

Your really knowledgeable I've given up which is a shame as the whole project was about getting all things cheap and repairing them I've put it on eBay I've given it enough time I'm more annoyed that it did work well once!! Never mind thanks for your time the airgun doctor wants £45 + 12 pnp more than I got it for cheers Andy