Logun Combi Pump Helllllllp Remove Please

[Andy_c 210]

Ive been lucky enough to buy what seems to be a knoookered pump managed to get the pressure up to 100 bar but it wouldn't go any further bearing in my mind I lost about 2 stone during this process can anyone tell me who makes these I've tried hills for a seal kit no luck and my search on google hasn't shaken any tree can anyone on here repair the thing or shall I take it to work and put it in the press ???

is there anymore 'o' rings in the base I cant strip it any more I take it the silver part needs stilsons to remove it

[Phantom 631]

Hill's of Sheffield.

 

http://www.airriflepump.com/

 

http://www.hillpumps.com/

 

Same company, Manufacture pumps for most brands

 

Tony

[Andy_c 210]

Just the man I was about to message about filling the s200 bolt in out etc I've emailed hills they didn't make these

[Andy_c 210]

Little o ring in somewhere near the non return valve

[Phantom 631]

Just the man I was about to message about filling the s200 bolt in out etc I've emailed hills they didn't make these

 

Bummer, but I bet their Schematics look similar?

 

When I've emptioed the AC on my baby, I pull back the bolt for a while

 

Thenit's fill as normal..

I'm too intoxicated to aswer further, ut I'll o better tomrrow!

[slave 33]

The logan pump ii the same as the FX pump https://www.gunspares.co.uk/products/24923/FX-Handpump/

[slave 33]

If your pump is the same as this http://www.ebay.co.uk/itm/Logan-Air-Rifle-Pistol-Pre-Charged-PCP-Gun-Stirrup-Hand-Pump-Valve-Hose-/221225995096?nma=true&si=qgHIB1WIMEGgo8n%252BNiFRbXvNgIY%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557 it is the older version the newer version has the guage on the top here is a strip down of the newer version http://www.youtube.com/watch?v=RRE4RvyRi7A

[slave 33]

Ive been lucky enough to buy what seems to be a knoookered pump managed to get the pressure up to 100 bar but it wouldn't go any further bearing in my mind I lost about 2 stone during this process can anyone tell me who makes these I've tried hills for a seal kit no luck and my search on google hasn't shaken any tree can anyone on here repair the thing or shall I take it to work and put it in the press

is there anymore 'o' rings in the base I cant strip it any more I take it the silver part needs stilsons to remove it

Looking at the photo this looks like the earlier version? To remove the fitting cut a piece of leather from an old belt grip the leather around the fitting with mole grips that have a curved jaw. stillsons will probably distort the fitting as the jaws are flat

[Andy_c 210]

Thanks been really helpful I've stripped it re o ringed it then found the breakdown pictures and realised the spring isn't there! Ordered now here!!

[Andy_c 210]

FIXED There was a spring missing now the question is shall I sell it and get the bottle sorted or keep it and save up for the bottle?

[Andy_c 210]

No it's f****d again ffs he original fx doesn't quite seem the same ANGER in the picture!

[slave 33]

It could be a couple of things Is the check valve sticking?

did you regrease the pump and has it overheated most manufacturers recommend 5 minutes of pumping and then 15 minutes to cool

[Andy_c 210]

I'm only getting to 30 seconds!! Lol ???

[slave 33]

Also check the purge valve rubber ball part 32

the problem with these pumps is there's feck all on web about servicing them

[Andy_c 210]

Hasn't got one of those strange it worked fine earlier?