hedge hunter 107 Posted August 5, 2013 Report Share Posted August 5, 2013 Hi guys im after some advise please. Iv recently just striped my old investarm 20g back to bare wood. It was in a terrible state, anyway after all the prep she was finally ready for the oil. I used a danish oil on the gun, left to dry, knocked back between coats etc, all as stated in other post. Now my question is now that its totally dried do i just leave it as is or do i need to wax it for a final finish ? Any help and advice greatly recived cheers hh Quote Link to post Share on other sites
AirgunGuy 362 Posted August 5, 2013 Report Share Posted August 5, 2013 Not to sure for Danish Oil but after i did mine with the Birchwood Casey kit, a wipe down with Ballistol every now and then should keep it in good nic Quote Link to post Share on other sites
hedge hunter 107 Posted August 5, 2013 Author Report Share Posted August 5, 2013 Cheers mate il check that out hh Quote Link to post Share on other sites
AirgunGuy 362 Posted August 5, 2013 Report Share Posted August 5, 2013 Cheers mate il check that out hh Keeps the metalwork protected also mate Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.