hedge hunter 107 Posted August 5, 2013 Report Share Posted August 5, 2013 Hi guys im after some advise please. Iv recently just striped my old investarm 20g back to bare wood. It was in a terrible state, anyway after all the prep she was finally ready for the oil. I used a danish oil on the gun, left to dry, knocked back between coats etc, all as stated in other post. Now my question is now that its totally dried do i just leave it as is or do i need to wax it for a final finish ? Any help and advice greatly recived cheers hh Quote Link to post
David Dey 2 Posted August 5, 2013 Report Share Posted August 5, 2013 Hi guys im after some advise please. Iv recently just striped my old investarm 20g back to bare wood. It was in a terrible state, anyway after all the prep she was finally ready for the oil. I used a danish oil on the gun, left to dry, knocked back between coats etc, all as stated in other post. Now my question is now that its totally dried do i just leave it as is or do i need to wax it for a final finish ? Any help and advice greatly recived cheers hh Hi. I have done a few stocks with Danish Oil and I allways leave them alone after drying, then when they get a few dings you can knock the finish back(very gently) with fine wire wool and give them another coat of Danish> DD Quote Link to post
hedge hunter 107 Posted August 5, 2013 Author Report Share Posted August 5, 2013 Great stuff cheers mate, this is the advise iv been looking for, cheers hh Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.