Danish Oil Stock Finish

[hedge hunter 107]

Hi guys im after some advise please. Iv recently just striped my old investarm 20g back to bare wood. It was in a terrible state, anyway after all the prep she was finally ready for the oil. I used a danish oil on the gun, left to dry, knocked back between coats etc, all as stated in other post. Now my question is now that its totally dried do i just leave it as is or do i need to wax it for a final finish ? Any help and advice greatly recived cheers hh

[David Dey 2]

Hi guys im after some advise please. Iv recently just striped my old investarm 20g back to bare wood. It was in a terrible state, anyway after all the prep she was finally ready for the oil. I used a danish oil on the gun, left to dry, knocked back between coats etc, all as stated in other post. Now my question is now that its totally dried do i just leave it as is or do i need to wax it for a final finish ? Any help and advice greatly recived cheers hh

Hi.

I have done a few stocks with Danish Oil and I allways leave them alone after drying, then when they get a few dings you can knock the finish back(very gently) with fine wire wool and give them another coat of Danish>

 

DD

[hedge hunter 107]

Great stuff cheers mate, this is the advise iv been looking for, cheers hh