Any Good?

[RossM 8,119]

Got these of a lad at work the ring is 4 inch and the spike is 10. Any good for end pins? My initial thoughts are they're too thick?

 

 

[R.A.W 1,987]

They would come in handy for pegging the dogs out on.

[smithie 2,443]

you always get people saying i use a 9 inch 6mm spike and i use an 8 inch, i got a 3 inch ring or 5.

 

the thing i find is for somebody new to longnetting is better with a larger ring on the end pin but the spike thickness and length depends on the soil were you work your nets.

 

i have some very stoney land where i can not get my endpins all the way in to the ground and as there only 5mm im sure they must feel more stress on the spike as its maybe 2/3 inch not in the ground so i could have a shorter spike on the nets i use there

 

if i was working loose or sandy soil maybe a thicker/longer spike would be more appropriate

 

just use what you have until more come along as long as you can work your net its not a problem, you can fine tune it all later.

[The one 8,463]

If there free there idealLOL

[Country Joe 1,411]

As long as your pin holds the net, thats all that matters, its not rocket science.

[saharashadow 26]

For me the dimensions aren't excessive. In fact most of my end pins are around 9" long and a 1/4" diameter. I suppose for some, the weight factor I would be a concern, but they look fine to me. Just give them a try and see how you get on.

[RossM 8,119]

I've got end pins kindly gifted by smithie, just a lad from work saw a net with pins in the back of my motor said he had about 20 of them lying around his garage, so i have 20 of them lol

[B.P.R 2,798]

I've got end pins kindly gifted by smithie, just a lad from work saw a net with pins in the back of my motor said he had about 20 of them lying around his garage, so i have 20 of them lol

Cheers pal