DanAdams 10 Posted July 30, 2013 Report Share Posted July 30, 2013 (edited) Hi all, looking to set up a cheap lamping kit. Just wondering if the lamp i was to buy had a lead with a cigar adapter on it could i cut the adapter off, strip the pvc liner off slightly and have pos and neg wires to attach to battery?? Does anyone know about these:http://www.amazon.co.uk/Riverside-Outdoor-Battery-Adaptor-Connect/dp/B00BBR9OCQ -Does the cigar adapter go into the like black tube and means i wouldn't have to take the adapter off??? Sorry for dum questions thanks in advance Dan Edited July 30, 2013 by DanAdams Quote Link to post
One-mode-torches 0 Posted July 30, 2013 Report Share Posted July 30, 2013 Hi Yes mate you can just connect the two wires together pos/red +red. And black to black neg- The plug is just a type of connector. Just make sure you don't cross the connections or you may blow the switch on your lamp. There are some good single mode scope mounted 4000lumen lamps on eBay with a narrow beam that use rechargeable batts I just picked one up and the batteries last upto 3 hours and a lot longer with a pressure switch that the seller fitted for me. Quote Link to post
DanAdams 10 Posted July 31, 2013 Author Report Share Posted July 31, 2013 Cheers, ATB Dan Quote Link to post
DanAdams 10 Posted July 31, 2013 Author Report Share Posted July 31, 2013 Does anyone have or used one of these or know what sort of beam i would get from one of these:http://www.uttings.co.uk/Product/757/115153/buffalo-river-cree-led-hand-held-lamp-brlt61led12v/ Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.