porkycrook 466 Posted July 31, 2013 Report Share Posted July 31, 2013 CRAP crap crap. Quote Link to post
Andy_c 210 Posted July 31, 2013 Author Report Share Posted July 31, 2013 Oh feck it shall I go try and split it? Because I want to have a sling on it!! Quote Link to post
Andy_c 210 Posted July 31, 2013 Author Report Share Posted July 31, 2013 Yea errr it will not separate :/ Quote Link to post
porkycrook 466 Posted July 31, 2013 Report Share Posted July 31, 2013 Have you got a heat gun? if so you might be able to warm the glue joint enough to break free. Quote Link to post
Andy_c 210 Posted July 31, 2013 Author Report Share Posted July 31, 2013 On 31/07/2013 at 23:19, Andy_c said: I could put it above the hob? I could put it above the hob?It electric Quote Link to post
porkycrook 466 Posted July 31, 2013 Report Share Posted July 31, 2013 That might work. Quote Link to post
Andy_c 210 Posted July 31, 2013 Author Report Share Posted July 31, 2013 I can't get it apart maybe there was something differ punt in the bottle? Quote Link to post
Andy_c 210 Posted August 1, 2013 Author Report Share Posted August 1, 2013 This is how it looks wht next Quote Link to post
porkycrook 466 Posted August 1, 2013 Report Share Posted August 1, 2013 (edited) Is it your intention to refinish the stock? if so then you should be able to sand the clue line andit might hide alot of what you can see in photo's. If you restain the stock then i would wait to see how well you have managed to hide the joint, if it is nice hidden repair then stain the stock in uniform coats. If the glue-line is not hidden that well then i would use a cheap childrens paintbrush to stain just the glue-line until you think that you have hidden it. Good luck and keep us up-dated. Edited August 1, 2013 by porkycrook 2 Quote Link to post
gunstar 2 Posted August 1, 2013 Report Share Posted August 1, 2013 is that the gun the profit90 was getting for his boy from fatoakey then there was some underhandness and you ended up with it you know if it had been me i would have said no to the deal has soon has i found out what was going on but that is me and not you or him godbless Quote Link to post
Andy_c 210 Posted August 1, 2013 Author Report Share Posted August 1, 2013 Well I didn't do anything wrong my friend even profit said that !! Intact I even offered it back to him several times and he didn't want it so learn your facts before trying to dirty my name !!! PLEASE REMOVE!! 1 Quote Link to post
AirgunGuy 362 Posted August 1, 2013 Report Share Posted August 1, 2013 If its a good strong bond then I would leave it and just re-do the stock. You've obviously done a decent job and the adhesive has been decent enough. Your stock should be easy enough to do as there's not a lot of chequering. Strip it with nitromors and refinish with Birchwood Casey kit. It's simple enough to do. You'll be able to fill the crack around the repair with brummer which is suitable for lighter woods. If it's well stuck I would leave it ;-) 1 Quote Link to post
Andy_c 210 Posted August 1, 2013 Author Report Share Posted August 1, 2013 On 01/08/2013 at 13:13, AirgunGuy said: If its a good strong bond then I would leave it and just re-do the stock. You've obviously done a decent job and the adhesive has been decent enough. Your stock should be easy enough to do as there's not a lot of chequering. Strip it with nitromors and refinish with Birchwood Casey kit. It's simple enough to do. You'll be able to fill the crack around the repair with brummer which is suitable for lighter woods. If it's well stuck I would leave it ;-)The joint is strong there is a slight join line which would sand easy enough so you wouldn't sand it down then? Quote Link to post
AirgunGuy 362 Posted August 1, 2013 Report Share Posted August 1, 2013 (edited) On 01/08/2013 at 13:18, Andy_c said: On 01/08/2013 at 13:13, AirgunGuy said: If its a good strong bond then I would leave it and just re-do the stock. You've obviously done a decent job and the adhesive has been decent enough. Your stock should be easy enough to do as there's not a lot of chequering. Strip it with nitromors and refinish with Birchwood Casey kit. It's simple enough to do. You'll be able to fill the crack around the repair with brummer which is suitable for lighter woods. If it's well stuck I would leave it ;-)The joint is strong there is a slight join line which would sand easy enough so you wouldn't sand it down then?Strip it with nitromors 1st. It may take a couple of applications to completely remove the old varnish. Then you can start sanding working your sand paper down to emery paper. After that you'll be able to see how much filling you'll need to do. If there are any small dings on the stock then they can be steamed out with a hot kettle. After that then you can start applying the finish. It's a very simple job with only basic wood working skills needed ;-) Edited August 1, 2013 by AirgunGuy Quote Link to post
AirgunGuy 362 Posted August 1, 2013 Report Share Posted August 1, 2013 Again...if its a good join then leave well alone. If you open it up again then you'll have the adhesive still on the faces and it will be much more difficult to get a good fit without having to sand the faces flat and then you never get a properly aligned join ;-) 1 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.