Strelok

[porkybella 284]

Any body calibrated using this software and wouldnt mind talking me thru it?

[Marksman 934]

Yep, done the AMD & Falcon EMD with it for

My rifles mate, works a treat

[Craig83 52]

Yeah i use it to great great affect with my .17 HMR and my .22 FAC Daystate MK4

 

One thing i would say is put the time into setting up the rifle.

 

Well worth the few quid for it

[Brackenharley 16]

I use this along side Hawke chairgun. Strelok has the mtc scb reticle but doesn't have any pellet information. Best thing to do is select the pellet you will be using and get the information for it from chairgun (weight, ballistic coefficient....). Put this information in the cartridge section then fill in the relevant information for you rifle (zero and scope height). Make sure wind speed is set at zero. If the target distance and zero are set the same press calculate and then click on the scb reticle to enlarge, it should have all your holdover points on. Also you can change the target distance and press calculate and the target on the reticle picture moves, so where the centre of the target is on the reticle is your aim point. Hope this helps, Dave.

[porkybella 284]

How do you calculate balistic co efficient and where do you measure the scope hieght from cheers rob

[Brackenharley 16]

You get the ballistic coefficient information from chairgun. It's just under pellet details, its known as BC on chairgun. I measured from the action to the centre of the scope. If you need some pellet info just put your gun favourite pellet up on this post and I will look it up for you. Dave

[porkybella 284]

Bracken if i get you all the relevant data can you put it in strelok for me can undastand bc pal

[Brackenharley 16]

Of course, if you pm me your email address I will send you a copy of the scb reticle with all the holdover points once I have done it. Dave

[porkybella 284]

Right been gathering the info how do i go about the scope hight i have a daystate mk4 with a shroud on it. And how do i find the centre of the scope?

[AR177 588]

Si did a video on it mate on his channel

[porkybella 284]

Nice one ad im hopeless with maths bud just tryna calibrate the viper

[porkybella 284]

Worked out all info just need to do my bc need a range to do it at.

[Buster321c 1,010]

Theres the feature of contacting the guy that developed it ( somewhere in there ) . I questioned a couple of things via e mail and got a reply within an hour . In my book its one of he best avaliable , have it on my mobilen with about 5 various rilfe setups in it , works VERY well IMHO