Lewis Ste 245 Posted June 28, 2013 Report Share Posted June 28, 2013 Quick question but does any one know how to get my hawke endurance 3x10-44 to focus down from 100-150 yards to around 50-60 on x10 mag? I read somewhere that you are able to turn the front lense to do this. The problem is I have to be on x4/x5 mag for the crosshairs to be clear when looking at a target 25m away. The scope is on a hw80k hence the reason I'm wanting it to be set around 50m Thanks, Lewis Quote Link to post
GEOFF.223 83 Posted July 3, 2013 Report Share Posted July 3, 2013 Screw off cap on the objective lens (front) then below this you will see the threads grab the threads and twist whilst looking through scope until focused. Be warned dont screw out to far or you will release the nitrogen in the scope and it will not be usable. Quote Link to post
Lewis Ste 245 Posted July 5, 2013 Author Report Share Posted July 5, 2013 Thanks Geoff iv got to clear past 30m now on x8 so use x4 on anything closer Thanks again Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.