Diy Camo Dip

[Andy_c 210]

Has anyone used DIY camo dip the prices seem high to have it sent away thinking of doing it myself if no one has il get on you tube thanks for any advise cheers Andy

[moxy 617]

Have a word with WXM. I'm sure he has had a dabble with good results.

[Andy_c 210]

Ok thanks

[tinson1 16]

Talk to porkybella! He has done a few things! Its easier than you think! But its still pretty hard to get decent results! Tbf i think its quite expensive! It would cost about £25 to have a silencer dipped and to buy the stuff it would be about that to begin with but yourll be able to to it several times for £25, as you need the camo strips and the activator spray! Ill get him to post some pics

[Andy_c 210]

That would be good I've had a quote for £30 for the silencer as it has the underlever holder I'm starting to think along the lines of the stealth camo tape no adhesives stick to its self I've also managed to find a vinyl wrap that sticks but leaves no sticky ? Choices choices

[Andy_c 210]

Talk to porkybella! He has done a few things! Its easier than you think! But its still pretty hard to get decent results! Tbf i think its quite expensive! It would cost about £25 to have a silencer dipped and to buy the stuff it would be about that to begin with but yourll be able to to it several times for £25, as you need the camo strips and the activator spray! Ill get him to post some pics

Yeavif you could I need to know the products required etc thanks

[pianoman 3,587]

Hi Andy.

Just a note of caution about DIY Cammo you should consider mate. It might make your rifle a poor bet for a trade-in or selling-on when you come to buy a new rifle.

 

You really sure you want to do this? Your SFS stage-2 tuned HW97 is a serious quality rifle.

 

Cammo is a thing of very personal taste and DIY jobs always look amateur-ish;- which makes a rifle look shit, to be honest. Good intentions pave many a road to hell in shooting! Chances are;; you'll regret it.

 

Sorry Andy but have a think seriously before you leap!

 

Best wishes.

Simon

[Skot Ruthless Teale 1,701]

Camo tape would be best bet mate. Pain in arse to get sticky crap off when you take it off but it can be done..the self-cling stuff is pretty good.

I tried using scrim net with my 97 but it was a pain in the arse reloading.. much easier with a bolt action pcp lol

And do you NEED to camo it?, for hunting? Some believe it makes no difference...

Edited June 25, 2013 by Skot Ruthless Teale

[Andy_c 210]

Thanks very valid comments chaps thanks there is final kits that apparently leave no residue its more for protection than look cheers Andy I've ordered some of that stealth tape that isn't sticky can try it and bin it for a fiver thanks again Andy

[Andy_c 210]

Camo tape would be best bet mate. Pain in arse to get sticky crap off when you take it off but it can be done..the self-cling stuff is pretty good.

I tried using scrim net with my 97 but it was a pain in the arse reloading.. much easier with a bolt action pcp lol

And do you NEED to camo it?, for hunting? Some believe it makes no difference...

I found some mossy oak obsession self ling tape £15 they quote it'll do a shot gun just under £15 if it looks pants can be removed and I wrap it round my head rambo style!!!!

[Andy_c 210]

Hi Andy.

Just a note of caution about DIY Cammo you should consider mate. It might make your rifle a poor bet for a trade-in or selling-on when you come to buy a new rifle.

 

You really sure you want to do this? Your SFS stage-2 tuned HW97 is a serious quality rifle.

 

Cammo is a thing of very personal taste and DIY jobs always look amateur-ish;- which makes a rifle look shit, to be honest. Good intentions pave many a road to hell in shooting! Chances are;; you'll regret it.

 

Sorry Andy but have a think seriously before you leap!

 

Best wishes.

Simon

yes very true il go with no permanent it'll looks nearly the same at a10th of the cost thanks for the advise

[kruby01 114]

I bought some of the tape and IMO it looked absolute crap even for me on a stoeger. You just cant get the angles right with tape so its now wrapped around my flask and my camera mount just to use it up.

 

However my stoeger is the X20S with the shrowded barrel so I bought a jack pyke neoprene barrel cover and it fits perfect although that is only the barrel camo'ed. Far better job than tape will get though IMO

[the big chief 3,099]

try camo it kits there about £50 will do ya hole gun and if you wont to take it off you can with no glue left on ya pride and joy i did mine simler but i used carbon wrap

[Andy_c 210]

Yea I found a company called mossy oak graphics they do 8 different camos same price same promises I'm looking at mossy oak obsession

[Andy_c 210]

This is the wrap I'm on about on the bay of e item no.321122834416 tell me what you think?!