hunter bull X 23 Posted June 19, 2013 Report Share Posted June 19, 2013 Hey guys I've just gone to fill my axsor an I can't get the probe to go all the way in iv tried it cocked an uncocked but it just won't go in any ideas ? If the answer is seals could anyone explain how I change this or these please. Thanks for any responses. Quote Link to post
the big chief 3,099 Posted June 19, 2013 Report Share Posted June 19, 2013 check the seal on the probe its self there should be a slot it sits in the seal may be twisted stopping it going in ya gun if so just play about with the seal with ya fingers try and man handle it in to place thats all i can think of off the top of my head all so have a look inside where the probe goes see if there is anything in side stopping it going in Quote Link to post
hunter bull X 23 Posted June 19, 2013 Author Report Share Posted June 19, 2013 Cheers gafer after closer inspection it was the bottom rubber seal on the probe iv replaced it with a new 1 although its ever so slightly thinner but its filling fine now. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.