witty 7 Posted June 17, 2013 Report Share Posted June 17, 2013 morning guys got my ultra .22 single shot (new bolt type) saturday and went to the range zero it what a nice little bit kit. using AA field 16.0 grn i know shot count is low on these but ran it over crombo 17 shots @ just about 11.1 lb/ft (565/560 fps) then another 6 shots starting at 554 fps droping 2 fps each shot to 547 stopped at this point this from a 200 bar fill down to 100 bar can you guys tell if this sound right also when i fit the silencer it shoots at 10.9 ish ???????? this newer version looks like air tank is smaller just a little i have read to fill to 190 bar but get fewer shot seemed to like a 200 fill any advice would be great didnt know weather to take it back and ask if they can increase it a tiny bit 11.4ish thanks mark Quote Link to post
secretagentmole 1,701 Posted June 17, 2013 Report Share Posted June 17, 2013 Whoa, it is new, what happens if you buy a nice shiny brand new car? You have to run the engine in. Your gun is still "factory fresh" meaning it needs to settle down and bed in. My Super 10 made about 10.7 when we bought it, a few months later and it had settled to 11.3! So give it a chance! Quote Link to post
Miikee-L 72 Posted June 17, 2013 Report Share Posted June 17, 2013 (edited) I have a scorpion and mines running at 10.9ftlb and i dont see any need to adjust mine as it shoots spot on! Although mines .177 so on a 22 the extra power might just make that bit of difference but as i dont use 22 i couldnt be sure mate Also i haven't chrono'd mine without so it could be interesting to see if it changes the power much! Edited June 17, 2013 by Miikee-L Quote Link to post
Bendover 67 Posted June 17, 2013 Report Share Posted June 17, 2013 The air res is bigger on the se ( bolt ) models and they can be filled to 232 bar. The old ones were 200 bar Quote Link to post
AR177 588 Posted June 18, 2013 Report Share Posted June 18, 2013 (edited) what are you hoping to achieve with the tiny extra ft.lbs? you could get that difference by simply changing pellets Edited June 18, 2013 by AR177 1 Quote Link to post
witty 7 Posted June 18, 2013 Author Report Share Posted June 18, 2013 thanks guys this is first pcp rifle and wanted ask owners advice rather than shop it came with check list and 10 shot chrono test putting out 11.2 - 11.1 lb/ft when i fitted silencer at home went down a bit (suppose thats correct) not looking for extra power more than happy with it making sure i it was giving right shot count etc as i have read fill to 190 and thats sweet spot then i should get 35 shots before power drops off.... but i have fill to the 200 bar (hills pump) to get 20/21 shots (all 11 lbft or just over) before i see drop off then i get maybe 6/8 shots starting at 10.8 dropping each shot to about 10.3 and that was only at 10 mtr....... i will wait till i have at least tin pelets then check again or does that sound about right for a new rifle. again guys thanks for your advice put my mind at rest thought i got a lemon from factory Quote Link to post
witty 7 Posted June 19, 2013 Author Report Share Posted June 19, 2013 thanks for all your advice guys got a bit of info off another forum new ultra has se internals and like higher fill ??? so i filled ultra to 215 bar and started crombo string WOW 30 shots at 11.2 10 from 10.96 to 10.67 checked what was left in rifle and said 110 bar so either my pump gauge is bit off or it likes higher fill thanks for all your advice as a newbie to pcp i will be back mark Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.