Bsa Magazines

[Dominic_newman2002 1]

Can you buy replacement springs for the .22 bsa mags it is the red new style but spring has gone weak and doesn't line up properly

[ArchieHood 3,692]

Apart from an O-ring, a cylinder and a spring, there isn't really an awful lot in there to go wrong.Have you stripped it down?........

[Wildling 520]

You can buy replacement parts for most things BSA on Chambers mate, but likes been said try stripping it first.

 

You can find stripping guides on YouTube.

[Bendover 67]

Phil does a modified version of the bsa mags that work sweeeeet!

[Dominic_newman2002 1]

Have stripped it down that's how I know it is spring when pellets are feed as it spins around they are not lining up properly to enter barrel causing it to jam, the spring has lost tension so need to replace it rather then spend 40 on a new mag

[Wildling 520]

Try winding the pellet holder one more turn when you've stripped it before assembling it, that should bring the spring tension up a little.

[Bendover 67]

The ends of the springs are bent 90° over the last 5mm and sit in grooves, if compressed they would no longer locate.

Someone else may know of a way though?

Your best bet would be John Knibbs i would think.

[secretagentmole 1,701]

https://www.youtube.com/watch?v=uVmbLtaq2WU

 

Try watching that and putting another turn in as Wasted_For_Ever suggested!