ahegarty 11 Posted June 5, 2013 Report Share Posted June 5, 2013 ive just baught a bsa ulrta se and dont know what pressure to put in could anyone help thanks Quote Link to post
AirgunGuy 362 Posted June 5, 2013 Report Share Posted June 5, 2013 Did you buy it new? If so check the literature that came with it. Also...it might have the max fill pressure stamped on the cylinder for instance max fill pressure 200bar. Other than that check the BSA website. They should have downloadable manuals ;-) Quote Link to post
ahegarty 11 Posted June 5, 2013 Author Report Share Posted June 5, 2013 the max fill says 232 and ill probs fill it at 190 just to be safe Quote Link to post
zini 1,939 Posted June 6, 2013 Report Share Posted June 6, 2013 (edited) For the sweet spot fill it to between 190 and 200 bar mate. Your good for 30 shots then in .177 and probably 35 in .22. 232 bar will give you another 8 to 10 shots but not as power consistent as the 30 at 200 bar. If your just using it for plinking or vermin control at close range, out to 15/20 meters 232 bar will be spot on. Edited June 6, 2013 by zini Quote Link to post
Bendover 67 Posted June 6, 2013 Report Share Posted June 6, 2013 Zini is bang on, standard mmc ultras are 200 bar, regulated and se models are 232 fill. As yours should be regulated with the standard bsa reg you should be fine filling to 232. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.