End Pins.

[darbo 4,774]

Would these be ok for stop nets just 2 inch fox net rings welded onto heavy duty tent pegs the best idea i could come up with.

 

[NELS0N 457]

They'll be plenty fine mate, what diameter is the steel?? i use 6 mm stainless for my end pins, 3" ring and a 9" post. ive got some smaller pins here i use on my stop nets with 2" rings and 5 1/2" posts.

[darbo 4,774]

6mm steel nelson 8 inch long never used end pins before just preset stop nets so it should be fun thanks for the reply.

[NELS0N 457]

6mm steel nelson 8 inch long never used end pins before just preset stop nets so it should be fun thanks for the reply.

more than enough Darbo.

 

Here some stainless ones ive made, formed the rings with my roller.

 

[darbo 4,774]

 

6mm steel nelson 8 inch long never used end pins before just preset stop nets so it should be fun thanks for the reply.

more than enough Darbo.

 

Here some stainless ones ive made, formed the rings with my roller.

 

 

Spot on

[TOMO 26,064]

Would these be ok for stop nets just 2 inch fox net rings welded onto heavy duty tent pegs the best idea i could come up with.

 

Good them plenty big enough,,,,, for little stop nets ,,,,you can just use purse net pegs

[darbo 4,774]

 

Would these be ok for stop nets just 2 inch fox net rings welded onto heavy duty tent pegs the best idea i could come up with.

 

Good them plenty big enough,,,,, for little stop nets ,,,,you can just use purse net pegs

 

[Tiercel 6,986]

 

Would these be ok for stop nets just 2 inch fox net rings welded onto heavy duty tent pegs the best idea i could come up with.

 

Good them plenty big enough,,,,, for little stop nets ,,,,you can just use purse net pegs

 

All my stop nets are on pegs.

 

 

TC

[Hot Meat 3,109]

Smart them Tiercel, I may invest in a couple of them over summer for season coming

[darbo 4,774]

 

 

Would these be ok for stop nets just 2 inch fox net rings welded onto heavy duty tent pegs the best idea i could come up with.

 

Good them plenty big enough,,,,, for little stop nets ,,,,you can just use purse net pegs

 

All my stop nets are on pegs.

 

 

TC

 

Thanks for the pic tc. i am a novice regarding stop nets i have only used preset ones before. I have put end pins on one with the intention of attemping to learn how to run out a long net . 6 yds is what i will start with before moving on to a longer net. i have run it out and picked it up a few times this morning a experienced netter would have kicked me up the arse watching me. im going to keep on practising then maybe in time i will move on.

[Tiercel 6,986]

If you have run out a stop net there is no reason why you could not run out a full net. We all started somewhere and as long as you can set a net out you will find your own way of setting and shooting the net, there is no right way or wrong way, nearly everyone does it differently. Just find a way that comfortable to you, other people can give you ideas but its your choice how you set and pick up.

 

TC

Edited March 22, 2014 by tiercel

[darbo 4,774]

If you have run out a stop net there is no reason why you could not run out a full net. We all started somewhere and as long as you can set a net out you will find your own way of setting and shooting the net, there is no right way or wrong way, nearly everyone does it differently. Just find a way that comfortable to you, other people can give you ideas but its your choice how you set and pick up.

 

TC

Thanks TC plenty practise to be done.

[Tiercel 6,986]

 

Thanks TC plenty practise to be done.

 

Not as much as you think, you will be surprised how quick you will pick it up.

 

TC

[darbo 4,774]

 

 

Thanks TC plenty practise to be done.

 

Not as much as you think, you will be surprised how quick you will pick it up.

 

TC