Would This Do?

[Country Joe 1,411]

http://www.ebay.co.uk/itm/300892154478?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2648

 

Thinking of getting a new joiner built ferret hutch, will be outside and therfore will face the elements, especially rain, looking for some thing to cover the mesh.

but not the type that covers the whole hutch, do you lads think this would do, or any ideas?

[tote 854]

What is it Laurie as the link won't open for me.

[Country Joe 1,411]

clear pvc with brass eyelets to put string through.

[patterdalejoel 669]

go to builders merchants and ask them to cut you some clear perspex to size, then drill small homes in each corner and zip tie it on. it is hardy and doesnt magnify the heat. i did it for mesh on a chicken shed and it works very well. or even better screw it on to the wood of the door.

[Country Joe 1,411]

go to builders merchants and ask them to cut you some clear perspex to size, then drill small homes in each corner and zip tie it on. it is hardy and doesnt magnify the heat. i did it for mesh on a chicken shed and it works very well. or even better screw it on to the wood of the door.

Thats sounds good.

[B.P.R 2,798]

perspex with some holes drilled in the top.... a hole.each.corner.....

 

screw on in winter..... take off in summer....

 

my job next winter

[netrigger 568]

Will You be taking a Litter out of that Nasty Wee Poley Bitch C.J ..

[ferrets88 5]

What about a bit of Tarpaulin fixed on the roof hanging down so you can roll it up as and when you want to put it down, and just secure with a line and bit of wood at the bottom its what works for me and is cheaper than perspex and wont go brittle with the weather.

[brucemyster 75]

My hutch and court are all roofed with felt and I use a couple of cheap tarps in the summer as shades stretched out from the top and then roll them down at night if a frost is forecast. In the winter I do the same , stretch them out in the morning if rain is forecast, it's a cheap but effect way to keep them dry, only cost a couple of quid each at the market. Perspex would look the dogs but a tad expensive for my wallet as is the chicken coup cover, i'd keep an eye open at bootfairs for a cheap pushchair plastic cover and re-model it, but then I'm a cheapskate

[Country Joe 1,411]

Will You be taking a Litter out of that Nasty Wee Poley Bitch C.J ..

Nah Bill not breeding, will be too busy playing with the pup.

[The one 8,477]

Think you could rig up something better for £18 ,but if you have enough overhang on the hutch roof you dont need a cover

[lifelong cumbrian 1,826]

http://www.ebay.co.uk/itm/300892154478?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2648

 

Thinking of getting a new joiner built ferret hutch, will be outside and therfore will face the elements, especially rain, looking for some thing to cover the mesh.

but not the type that covers the whole hutch, do you lads think this would do, or any ideas?

 

http://www.ebay.co.uk/itm/300892154478?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2648

 

Thinking of getting a new joiner built ferret hutch, will be outside and therfore will face the elements, especially rain, looking for some thing to cover the mesh.

but not the type that covers the whole hutch, do you lads think this would do, or any ideas?

Where you getting the hutch CJ. I would design the hutch with the roof and sides extended so you don't need to bother with covering the cage fronts.

[Country Joe 1,411]

 

http://www.ebay.co.uk/itm/300892154478?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2648

 

Thinking of getting a new joiner built ferret hutch, will be outside and therfore will face the elements, especially rain, looking for some thing to cover the mesh.

but not the type that covers the whole hutch, do you lads think this would do, or any ideas?

 

http://www.ebay.co.uk/itm/300892154478?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2648

 

Thinking of getting a new joiner built ferret hutch, will be outside and therfore will face the elements, especially rain, looking for some thing to cover the mesh.

but not the type that covers the whole hutch, do you lads think this would do, or any ideas?

Where you getting the hutch CJ. I would design the hutch with the roof and sides extended so you don't need to bother with covering the cage fronts.

 

Same joiner that made my kennel LC, he can make anything, does a really good job. i need a plan, thinking about 6ft long two tier.

[netrigger 568]

 

Will You be taking a Litter out of that Nasty Wee Poley Bitch C.J ..

Nah Bill not breeding, will be too busy playing with the pup.

 

Aye Mate and Iam sure the new Pup will do You proud...

a.t.b..

[joe14 98]

i got some of this, bought 2 metres for my ferret run, lets light in aswell as keeps them dry.

http://www.ebay.co.uk/itm/CRYSTAL-CLEAR-PVC-VINYL-OICLOTH-TABLECLOTH-WATERPROOF-TABLE-PROTECTOR-COVERINGS-/220946295550?pt=UK_Crafts_Fabric&hash=item33716ceafe