lewis collins 4 Posted April 20, 2013 Report Share Posted April 20, 2013 Hi guys I've been setting by new hw97k up and using chairgun to give me an idea of where it is going to hit. so with all the data put in I see where its hitting. I then go to print the scope cap out but on the left hand side it goes from 4 yards gradually up to 15. which is what I want. then on the right hand side it goes 30 - 46 - 57 and so on. but what i want to know is can get the right hand side to from 30 and end at 45 yards with more precise aiming point? thanks for any help guys Lew Quote Link to post
secretagentmole 1,701 Posted April 20, 2013 Report Share Posted April 20, 2013 (edited) Try altering the zoom setting, you know the scope zoom! Edited April 20, 2013 by secretagentmole Quote Link to post
ghillies 209 Posted April 20, 2013 Report Share Posted April 20, 2013 have you got the half mildot aloud on the main poi chart? dunno if it'll put them on the turret bit. Quote Link to post
lewis collins 4 Posted April 20, 2013 Author Report Share Posted April 20, 2013 thanks for the help guys I changed it to 1/2 mildot and it worked thanks again Lew Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.